Analysis of Small Deflections by Double-Exposure Digital Holographic Interferometry
被引:0
作者:
Budini, Nicolas
论文数: 0引用数: 0
h-index: 0
机构:
Univ Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, Argentina
Inst Fis Litoral UNL CONICET, Santa Fe, Santa Fe, ArgentinaUniv Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, Argentina
Budini, Nicolas
[1
,2
]
Mulone, Cecilia
论文数: 0引用数: 0
h-index: 0
机构:
Univ Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, ArgentinaUniv Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, Argentina
Mulone, Cecilia
[1
]
Vincitorio, Fabio M.
论文数: 0引用数: 0
h-index: 0
机构:
Univ Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, ArgentinaUniv Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, Argentina
Vincitorio, Fabio M.
[1
]
Lopez, Ana J.
论文数: 0引用数: 0
h-index: 0
机构:
Univ A Coruna, Ctr Invest Tecnol, Ferrol, SpainUniv Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, Argentina
Lopez, Ana J.
[3
]
Ramil, Alberto
论文数: 0引用数: 0
h-index: 0
机构:
Univ A Coruna, Ctr Invest Tecnol, Ferrol, SpainUniv Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, Argentina
Ramil, Alberto
[3
]
机构:
[1] Univ Tecnol Nacl, Fac Reg Parana, Grp Invest Fis Aplicada, Parana, Argentina
[2] Inst Fis Litoral UNL CONICET, Santa Fe, Santa Fe, Argentina
[3] Univ A Coruna, Ctr Invest Tecnol, Ferrol, Spain
来源:
2014 IEEE BIENNIAL CONGRESS OF ARGENTINA (ARGENCON)
|
2014年
关键词:
D O I:
暂无
中图分类号:
TM [电工技术];
TN [电子技术、通信技术];
学科分类号:
0808 ;
0809 ;
摘要:
We analyzed small deflections (similar to 1 mu m) of an opaque object by means of the double-exposure digital holographic interferometry technique, using an off-axis lensless Fourier holographic arrangement. The deflections were caused by heating the object with a flowing dc current. In our holographic arrangement, out-of-plane displacements of around 300 nm can be precisely detected by using a He-Ne laser as the coherent illumination source. However, this resolution could be improved by modifying the experimental setup or even choosing an appropriate object reference state. We briefly show the theoretical description of the technique and conduct experiments and simulations to test the results. Since the object we have studied in this work is a bimetallic strip, the obtained results point towards further research concerning precise temperature sensing devices.