Three-Phase Single-Switch DCM Boost PFC Converter With Optimum Utilization Control of Switching Cycles

A three-phase single-switch discontinuous conduction mode (DCM) boost power factor correction (PFC) converter features zero-current turn on for the switch, no reverse recovery in the diode, a constant-switching-frequency operation, a simple control, and a low cost, which are suitable for low-to-medium-power and cost-sensitive applications. Due to the DCM, the energy transfer does not cover the whole switching cycle, the rms and peak values of the inductor current are large, and those of the switch and the diode are also large. This increases not only the current stress of the power components but also the conduction and switching turn-off losses, which lower the efficiency of the converter. An optimum utilization control of switching cycles is proposed in this paper to increase the critical boost inductance. The rms and peak current values of the main power components are reduced, and the conduction and switching turn-off losses are therefore decreased, leading to higher efficiency. The proposed method also slightly achieves an output voltage ripple reduction, and the input current harmonics comply with the standard of the International Electrotechnical Commission 61000-3-2 Class A.