Delamination buckling and growth phenomena in stiffened composite panels under compression. Part I: An experimental study

被引：31

作者：

Riccio, A. ^{[1
]}

Raimondo, A. ^{[1
]}

Fragale, S. ^{[2
]}

Camerlingo, F. ^{[2
]}

Gambino, B. ^{[2
]}

Toscano, C.

Tescione, D.

机构：

[1] Univ Naples 2, Dept Ind & Informat Engn, I-81031 Aversa, Italy

[2] Alenia Aermacchi, Varese, Italy

来源：

JOURNAL OF COMPOSITE MATERIALS | 2014年 / 48卷 / 23期

关键词：

Layered structures; delamination; mechanical testing; optical fibers monitoring; DYNAMIC STRAIN SIGNALS; OPTICAL-FIBER SENSORS; FBG SENSORS;

D O I：

10.1177/0021998313502741

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

An experimental investigation has been carried out on skin delaminations buckling and growth phenomena in stiffened composite panels subjected to compression loading. Optical fibers have been used to monitor the delamination-related phenomena. The optical fibers have been embedded in the skin close to an artificial delamination following paths with minimum length, satisfying the grating sensor locations and direction requirements and fulfilling specific embedding/integrity constraints. The stiffened panel has been also instrumented with back-to-back strain gauges in skin and stringer locations to acquire additional information on delamination and panel buckling and on delamination growth. Finally, a lock-in thermography inspection activity has been performed at different levels of the applied compressive load to acquire information on the delamination buckling and growth shapes. The performed experimental activity was aimed to study the delamination-related phenomena by comparing experimental data obtained from different sources focusing on delamination growth initiation and delamination growth stability.

引用

页码：2843 / 2855

页数：13

共 17 条

[1] THERMAL WAVE IMAGING WITH PHASE SENSITIVE MODULATED THERMOGRAPHY [J].

BUSSE, G ;

WU, D ;

KARPEN, W .

JOURNAL OF APPLIED PHYSICS, 1992, 71 (08) :3962-3965

[2] Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part II: Damage identification [J].

Frieden, Jeannot ;

Cugnoni, Joel ;

Botsis, John ;

Gmuer, Thomas .

COMPOSITE STRUCTURES, 2012, 94 (02) :593-600

[3] Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part I: Impact detection and localization [J].

Frieden, Jeannot ;

Cugnoni, Joel ;

Botsis, John ;

Gmuer, Thomas .

COMPOSITE STRUCTURES, 2012, 94 (02) :438-445

[4]

Leblanc M, 1992, COMPOS ENG, V2, P513

[5] Utilization of embedded optical fibre sensors for delamination characterization in composite laminates using a static strain method [J].

Ling, HY ;

Lau, KT ;

Cheng, L ;

Jin, W .

SMART MATERIALS AND STRUCTURES, 2005, 14 (06) :1377-1386

[6]

Maldague X.P.V., 1993, Nondestructive Evaluation of Materials by Infrared Thermography

[7]

Mrad N., 2002, Encyclopedia of smart materials, P715

[8] Damage growth detection of composite laminate using embedded FBG sensor/PZT actuator hybrid system [J].

Ogisu, T ;

Shimanuki, M ;

Kiyoshima, S ;

Okabe, Y ;

Takeda, N .

Smart Structures and Materials 2005: Smart Sensor Technology and Measurement Systems, 2005, 5758 :93-104

[9] Positioning of Embedded Optical Fibres Sensors for the Monitoring of Buckling in Stiffened Composite Panels [J].

Riccio, A. ;

Di Caprio, F. ;

Camerlingo, F. ;

Scaramuzzino, F. ;

Gambino, B. .

APPLIED COMPOSITE MATERIALS, 2013, 20 (01) :73-86

[10] Detection of delamination in a composite material based on the measurement of static strain using a surface-mounted fiber Bragg grating sensor [J].

Rong, Weifeng ;

Wang, Yixin ;

Ng, Jun Hong ;

Kuang, Wu ;

Paulose, Varghese .

OPTICAL ENGINEERING, 2011, 50 (01)

← 1 2 →