The performance of TiN coated carbide tools when turning AISI 8620 steel

被引：8
作者：
de Avila, Renato Francoso
Abrao, Alexandre Mendes
Duraes de Godoy, G. Cristina
机构：
[1] Univ Fed Minas Gerais, Dept Mech Engn, BR-31270901 Belo Horizonte, MG, Brazil
[2] Univ Fed Minas Gerais, Dept Met Engn, BR-30160030 Belo Horizonte, MG, Brazil
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2006年 / 179卷 / 1-3期
关键词：
crater wear volume; turning; topographic analysis; coatings;
D O I：
10.1016/j.jmatprotec.2006.03.066
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This work is concerned with the performance of uncoated and coated carbide tools (ISO grade K10) with a 3 mu m thick monolayer of TiN (produced by PAPVD) when continuous turning AISI 8620 steel. For this purpose a topographic analysis was employed to assess the crater wear volume evolution. This methodology is considered a more realistic alternative to study crater wear when compared to the bi-dimensional parameters established by ISO 3685/93. The tests were carried out under typical machining conditions. The results indicated that two distinct crater wear rates are present when machining using coated cutting tools, whereas a higher and single wear rate was identified for the uncoated inserts. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：161 / 164
页数：4
相关论文
共 50 条
[41]   Cutting performance of CBN and diamond tools in dry turning of cemented carbide [J].
Abang Kamaruddin, Abang Mohammad Nizam ;
Hosokawa, Akira ;
Ueda, Takashi ;
Furumoto, Tatsuaki ;
Koyano, Tomohiro .
MECHANICAL ENGINEERING JOURNAL, 2016, 3 (01)
[42]   Analyses of Tool Wear and Chip Type for Different Coated Carbide Inserts in Turning Hardened 1.6582 Steel [J].
Sramhauser, Karel ;
Naprstkova, Natasa ;
Sviantek, Jan ;
Stancekova, Dana ;
Nguyen Van Tuong ;
Novotny, Jan .
COATINGS, 2022, 12 (07)
[43]   Influence of cutting parameters and tool nose radius on the wear behavior of coated carbide tool when turning austenitic stainless steel [J].
Li, Weijun ;
Zhou, Bowen ;
Xing, Lijun ;
He, Hong ;
Ni, Xuejie ;
Li, Maojun ;
Gong, Zhihui .
MATERIALS TODAY COMMUNICATIONS, 2023, 37
[44]   Ambient and elevated temperature properties of TiN, TiAlN and TiSiN PVD films and their impact on the cutting performance of coated carbide tools [J].
Bouzakis, K. -D. ;
Skordaris, G. ;
Gerardis, S. ;
Katirtzoglou, G. ;
Makrimallakis, S. ;
Pappa, M. ;
Lill, E. ;
M'Saoubi, R. .
SURFACE & COATINGS TECHNOLOGY, 2009, 204 (6-7) :1061-1065
[45]   The corrosion and wear behavior of TiN and TiAlN coated AISI 316 L stainless steel [J].
Kayali, Yusuf .
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2014, 50 (03) :412-419
[46]   Comparative Evaluation of Performances of TiAlN-, AlCrN- and AlCrN/TiAlN-Coated Carbide Cutting Tools and Uncoated Carbide Cutting Tools on Turning EN24 Alloy Steel [J].
Sampath Kumar T. ;
Balasivanandha Prabu S. ;
Sorna Kumar T. .
Journal of Advanced Manufacturing Systems, 2017, 16 (03) :237-261
[47]   Performance of Multilayer Coated and Cryo-Treated Uncoated Tools in Machining of AISI H13 Tool Steel-Part 1: Tungsten Carbide End Mills [J].
Cicek, Adem ;
Kivak, Turgay ;
Ekici, Ergun ;
Kara, Fuat ;
Ucak, Necati .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (05) :3436-3445
[48]   Topographic analysis of the crater wear on TiN, Ti(C,N) and (Ti,Al)N coated carbide tools [J].
Avila, R. F. ;
Godoy, C. ;
Abrao, A. M. ;
Lima, M. M. .
WEAR, 2008, 265 (1-2) :49-56
[49]   Wear and Breakage Features of Multi-coated Tools in Turning Hardened Steel [J].
Hou, Zhigang ;
Zhao, Jun ;
Xu, Liqiang ;
Guo, Zhong .
FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4, 2011, 44-47 :2168-+
[50]   Machinability Performance of Single Coated and Multicoated Carbide Tools During Turning Ti6Al4V Alloy [J].
Ali, Ahsen ;
Younas, Muhammad ;
Khan, Mushtaq ;
Jaffery, Syed Husain Imran ;
Khan, Zarak .
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2025, 26 (01) :43-58
12345