Effect of TGO thickness on the thermal barrier coatings life under thermal shock and thermal cycle loading

被引：85

作者：

Torkashvand, Kaveh ^{[1
]}

Poursaeidi, Esmaeil ^{[1
]}

Mohammadi, Maryam ^{[1
]}

机构：

[1] Univ Zanjan, Fac Engn, Mech Engn Dept, Zanjan, Iran

来源：

CERAMICS INTERNATIONAL | 2018年 / 44卷 / 08期

关键词：

Thermal shock; Thermal cycling; TGO thickness; Thermal barrier coating; STRESS-DISTRIBUTION; PART I; BEHAVIOR; SYSTEM; LAYER; RESISTANCE; MODEL; STATE; 8YSZ;

D O I：

10.1016/j.ceramint.2018.02.140

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Effect of thermally grown oxide (TGO) thickness on thermal shock resistance of thermal barrier coatings (TBCs) and also their behavior under a cyclic loading (including aging at maximum temperature) was evaluated experimentally. In order to form different thicknesses of TGO, coated samples experience isothermal loading at 1070 degrees C for various periods of times. Heat-treated samples were heated to 1000 degrees C and cooled down rapidly in water from the substrate side using a mechanical fixture. The life of samples was investigated as a function of TGO thickness. Furthermore, by performing an experiment the simultaneous effect of the TGO growth and thermal expansion mismatch on the failure of thermal barrier coatings was evaluated. The results demonstrated that the presence of TGO with a thickness of 2-3 mu m has a positive effect on the resistance against thermal shock.

引用

页码：9283 / 9293

页数：11

共 32 条

[1] A parametric study of the stress state of thermal barrier coatings Part II:: cooling stresses [J].

Bäker, M ;

Rösler, J ;

Heinze, G .

ACTA MATERIALIA, 2005, 53 (02) :469-476

[2]

Biker M., 2017, J THERM SPRAY TECHNO

[3] A mechanistic study of oxidation-induced degradation in a plasma-sprayed thermal barrier coating system. Part I: Model formulation [J].

Busso, EP ;

Lin, J ;

Sakurai, S ;

Nakayama, M .

ACTA MATERIALIA, 2001, 49 (09) :1515-1528

[4] Thermal/residual stress in an electron beam physical vapor deposited thermal barrier coating system [J].

Cheng, J ;

Jordan, EH ;

Barber, B ;

Gell, M .

ACTA MATERIALIA, 1998, 46 (16) :5839-5850

[5] The influence of temperature gradient across YSZ on thermal cyclic lifetime of plasma-sprayed thermal barrier coatings [J].

Dong, Hui ;

Yang, Guan-Jun ;

Cai, Hong-Neng ;

Ding, Hang ;

Li, Cheng-Xin ;

Li, Chang-Jiu .

CERAMICS INTERNATIONAL, 2015, 41 (09) :11046-11056

[6] Failure Mechanism for Thermal Fatigue of Thermal Barrier Coating Systems [J].

Giolli, C. ;

Scrivani, A. ;

Rizzi, G. ;

Borgioli, F. ;

Bolelli, G. ;

Lusvarghi, L. .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2009, 18 (02) :223-230

[7] A diffusion-based oxide layer growth model using real interface roughness in thermal barrier coatings for lifetime assessment [J].

Gupta, M. ;

Eriksson, R. ;

Sand, U. ;

Nylen, P. .

SURFACE & COATINGS TECHNOLOGY, 2015, 271 :181-191

[8] Critical cooling rates to avoid transient-driven cracking in thermal barrier coating (TBC) systems [J].

Jackson, R. Wesley ;

Begley, Matthew R. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2014, 51 (06) :1364-1374

[9] Rapid freshness analysis of mantis shrimps (Oratosquilla oratoria) by using electronic nose [J].

Jiang, Jinghao ;

Li, Jian ;

Zheng, Feixiang ;

Lin, Han ;

Hui, Guohua .

JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION, 2016, 10 (01) :48-55

[10] Adhesion strength and thermal shock properties of nanostructured 5La3TiYSZ, 8LaYSZ and 8CeYSZ coatings prepared by atmospheric plasma spraying [J].

Jin, Lei ;

Liu, Guifang ;

Li, Peizhong ;

Zhou, Haibin ;

Wang, Chun ;

Zhou, Guodong .

CERAMICS INTERNATIONAL, 2015, 41 (09) :12099-12106

← 1 2 3 4 →