Dependence of shape deviations and surface roughness in the hardened steel turning

被引：9

作者：

Struzikiewicz, Grzegorz ^{[1
]}

Otko, Tadeusz ^{[1
]}

机构：

[1] Cracow Univ Technol, PL-31864 Krakow, Poland

来源：

PRECISION MACHINING VII | 2014年 / 581卷

关键词：

turning; ceramic cutting tools; roughness; shape deviation; Taguchi method; hardened steel; CUTTING PARAMETERS; TAGUCHI METHOD; CERAMIC TOOLS; ALLOY-STEEL; OPTIMIZATION;

D O I：

10.4028/www.scientific.net/KEM.581.443

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The article focuses on analysis of the effects cutting parameters on the surface roughness and shape errors. Research was performed for longitudinal turning of hardened steel 145Cr with using ceramic tools of different nose radius. Shape deviations and roughness for machined surfaces were determined.

引用

页码：443 / 448

页数：6

共 14 条

[1] Cutting forces and tool wear in intermittent turning processes with Al 2O3-based ceramic tools [J].

Cui, X.B. ;

Zhao, J. ;

Zhou, Y.H. ;

Pei, Z.Q. .

Key Engineering Materials, 2012, 499 :205-210

[2] Characterization of topography of cut surface based on theoretical roughness indexes [J].

Felho, Csaba ;

Kundrak, Janos .

PRECISION MACHINING VI, 2012, 496 :194-199

[3] Surface finish generated in hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts [J].

Grzesik, W. ;

Wanat, T. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (15) :1988-1995

[4]

Han ZL, 2010, KEY ENG MAT, V443, P238, DOI [10.4028/www.scientific.net/KEM.442.238, 10.4028/www.scientific.net/KEM.443.238]

[5] Possibility of Reducing Environmental Load in Hard Machining [J].

Kundrak, Janos ;

Varga, Gyula .

PRECISION MACHINING VI, 2012, 496 :205-210

[6]

Lin W.S., 2007, KEY ENG MATER, V364-366, P1015

[7] Machinability for turning of 1Cr18Ni9Ti austenitic stainless steel with ceramic tool [J].

Liu, Z. Q. ;

Wang, J. M. ;

Wan, Y. .

ADVANCES IN MACHINING & MANUFACTURING TECHNOLOGY VIII, 2006, 315-316 :584-587

[8]

Mehrotra P.K., 1997, KEY ENG MATER, V138-140, P1

[9]

Motorcu AR, 2010, STROJ VESTN-J MECH E, V56, P391

[10] Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning [J].

Nalbant, M. ;

Gokkaya, H. ;

Sur, G. .

MATERIALS & DESIGN, 2007, 28 (04) :1379-1385

← 1 2 →