UNSTEADY MIXED CONVECTION IN A POROUS MEDIA FILLED LID-DRIVEN CAVITY HEATED BY A SEMI-CIRCULAR HEATERS

被引：18

作者：

Rahman, Md Mustafizur ^{[1
,3
]}

Oztop, Hakan F. ^{[2
]}

Saidur, Rahman ^{[4
]}

Mekhilef, Saad ^{[5
]}

Al-Salem, Khaled ^{[6
]}

机构：

[1] Univ Brunei Darussalam, Fac Sci, Math & Comp Sci Grp, Bandar Seri Begaman, Brunei

[2] Firat Univ, Dept Mech Engn, Fac Technol, TR-23169 Elazig, Turkey

[3] Bangladesh Univ Engn & Technol, Dept Math, Dhaka, Bangladesh

[4] King Fand Univ Petr & Minerals, Res Inst, Ctr Res Excellence Renewable Energy CoRE RE, Dhahran, Saudi Arabia

[5] Univ Malaya, Fac Engn, Dept Elect Engn, Kuala Lumpur, Malaysia

[6] King Saud Univ, Dept Mech Engn, Engn Coll, Riyadh, Saudi Arabia

来源：

THERMAL SCIENCE | 2015年 / 19卷 / 05期

关键词：

porous media; lid-driven cavity; mixed convection; curvilinear heater; OSCILLATING THIN FIN; NATURAL-CONVECTION; ENTROPY GENERATION; FLUID-FLOW; ENCLOSURE; WALL;

D O I：

10.2298/TSCI130725098R

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A computational study has been performed on natural convection heat transfer and fluid flow in a porous media filled enclosure with semi-circular heaters by using finite element method. The ceiling of the cavity moves with a constant velocity and it is insulated. Vertical walls temperature is lower than that of heaters. Results are presented via streamlines, isotherms, average Nusselt numbers, and cross-sectional velocity for different governing parameters such as Richardson and Darcy numbers, and dimensionless time. It is observed that both circulation of the flow and heat transfer is strongly affected with time increment and Darcy number inside the cavity.

引用

页码：1761 / 1768

页数：8

共 50 条

[31] Partially heated lid-driven flow in a hexagonal cavity with inner circular obstacle via FEM
Ul Haq, Rizwan
Soomro, Feroz Ahmed
Wang, Xiuli
Tlili, Iskander
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2020, 117
[32] Numerical study of mixed convection and entropy generation of Water-Ag nanofluid filled semi-elliptic lid-driven cavity
Zhang, Haiying
Nie, Xiujun
Bokov, Dmitry Olegovich
Toghraie, Davood
Akbari, Omid Ali
Montazerifar, Farnaz
Pourfattah, Farzad
Esmaeili, Yousof
Khodaparast, Roohollah
ALEXANDRIA ENGINEERING JOURNAL, 2022, 61 (11) : 8875 - 8896
[33] Mixed convection heat transfer in a lid-driven cavity with a rotating circular cylinder
Khanafer, Khalil
Aithal, S. M.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2017, 86 : 131 - 142
[34] Mixed Convection in Lid-Driven Cavity with Inclined Magnetic Field
Bakar, N. A.
Roslan, R.
Karimipour, A.
Hashim, I.
SAINS MALAYSIANA, 2019, 48 (02): : 451 - 471
[35] Numerical analysis of mixed convection at various walls speed ratios in two-sided lid-driven cavity partially heated and filled with nanofluid
Jmai, Ridha
Ben-Beya, Brahim
Lili, Taieb
JOURNAL OF MOLECULAR LIQUIDS, 2016, 221 : 691 - 713
[36] Lattice Boltzmann Simulation of Mixed Convection Heat Transfer in a Lid-Driven Square Cavity Filled With Nanofluid: A Revisit
Ekici, Ozgur
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2018, 140 (07):
[37] Mixed Convection of Nanofluids in a Lid-Driven Rough Cavity
Guo, Zhimeng
Wang, Jinyu
Mozumder, Aloke K.
Das, Prodip K.
7TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING (ICTE), 2017, 1851
[38] Hybrid nanofluid mixed convection in a lid-driven wavy cavity with internal heated plate
Theeb, Maathe A.
Abdulkadhim, Ammar
Hamza, Nasser H.
Al-Dawody, Mohamed F.
Sheremet, Mikhail
Kadhem, Wasan J.
RESULTS IN SURFACES AND INTERFACES, 2025, 18
[39] Mixed convective heat transfer and heat generation simulation in lid-driven enclosure filled with porous medium
Souayeh, Basma
Hdhiri, Najib
INTERNATIONAL JOURNAL OF MODERN PHYSICS C, 2021, 32 (08):
[40] IMPLICATIONS OF PLACING A POROUS BLOCK IN A MIXED-CONVECTION HEAT-TRANSFER, LID-DRIVEN CAVITY HEATED FROM BELOW
AlAmiri, Abdalla M.
JOURNAL OF POROUS MEDIA, 2013, 16 (04) : 367 - 380

← 1 2 3 4 5 →