Effect of time on the formation of hydroxyapatite in PEO process with hydrothermal treatment of the Ti-6Al-4V alloy

被引：23
|
作者：
Kossenko, A. [1 ]
Lugovskoy, S. [1 ]
Astashina, N. [2 ]
Lugovskoy, A. [1 ]
Zinigrad, M. [1 ]
机构：
[1] Ariel Univ, IL-40700 Ariel, Israel
[2] Perm State Acad Med, Perm 614990, Russia
来源：
GLASS PHYSICS AND CHEMISTRY | 2013年 / 39卷 / 06期
关键词：
plasma electrolytic oxidation; hydroxyapatite; oxide layers; biomaterials; osseointegration; CALCIUM-PHOSPHATE; COATINGS; TITANIUM; DEPOSITION; OXIDATION;
D O I：
10.1134/S1087659613060072
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A titania layer containing calcium and phosphate with rough and porous structure was prepared by plasma electrolytic oxidation (PEO) and hydrothermal treatment (HT) at different time treatment. The most corresponding to the stoichiometry of hydroxiapatite ratio of Ca: P in the oxide layer can be achieved by the optimization of the electrolyte composition and the main parameters of PEO. While at the stage of PEO hydroxiaptite precursors are formed with only residual quantity of the hydroxyapatite, the subsequent hydrothermal treatment results in the formation of a much more pronounced hydroxyapatite phase.
引用
收藏
页码：639 / 642
页数：4
相关论文
共 50 条
  • [31] Investigation of the voltage and time effects on the formation of hydroxyapatite-containing titania prepared by plasma electrolytic oxidation on Ti-6Al-4V alloy and its corrosion behavior
    Montazeri, M.
    Dehghanian, C.
    Shokouhfar, M.
    Baradaran, A.
    APPLIED SURFACE SCIENCE, 2011, 257 (16) : 7268 - 7275
  • [32] Drilling burr formation in titanium alloy, Ti-6Al-4V
    Dornfeld, DA
    Kim, JS
    Dechow, H
    Hewson, J
    Chen, LJ
    CIRP ANNALS 1999 - MANUFACTURING TECHNOLOGY, 1999, : 73 - 76
  • [33] Microstructures of plasma-sprayed hydroxyapatite-coated Ti-6Al-4V dental implants
    Tufekci, E
    Brantley, WA
    Mitchell, JC
    McGlumphy, EA
    INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS, 1997, 12 (01) : 25 - 31
  • [34] Apatite formation on anodized Ti-6Al-4V alloy in simulated body fluid
    Cui, Xinyu
    Kim, Hyun-Min
    Kawashita, Masakazu
    Wang, Longbao
    Xiong, Tianying
    Kokubo, Tadashi
    Nakamura, Takashi
    METALS AND MATERIALS INTERNATIONAL, 2010, 16 (03) : 407 - 412
  • [35] Evaluation of residual stresses induced by cold spraying of Ti-6Al-4V on Ti-6Al-4V substrates
    Boruah, Dibakor
    Ahmad, Bilal
    Lee, Tung Lik
    Kabra, Saurabh
    Syed, Abdul Khadar
    McNutt, Philip
    Dore, Matthew
    Zhang, Xiang
    SURFACE & COATINGS TECHNOLOGY, 2019, 374 : 591 - 602
  • [36] Nanotube formation and coating of hydroxyapatite-polyvinyl alcohol-collagen composite on Ti-6Al-4V metal alloy
    Charlena, Charlena
    Nuzulia, Nur Aisyah
    Hana, Asiah
    PURE AND APPLIED CHEMISTRY, 2025, 97 (03) : 245 - 255
  • [37] Electrochemical Deposition of Hydroxyapatite Substituted with Magnesium and Strontium on Ti-6Al-4V Alloy
    Lee, Kang
    Ko, Yeong-Mu
    Choe, Han-Cheol
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2018, 18 (02) : 1449 - 1452
  • [38] Effect of combination treatment on wear resistance and strength of Ti-6Al-4V alloy
    Morita, Tatsuro
    Asakura, Keita
    Kagaya, Chuji
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 618 : 438 - 446
  • [39] Laser Powder Cladding of Ti-6Al-4V / Alloy
    Ali, Samar Reda Al-Sayed
    Hussein, Abdel Hamid Ahmed
    Nofal, Adel Abdel Menam Saleh
    Elnaby, Salah Elden Ibrahim Hasseb
    Elgazzar, Haytham Abdelrafea
    Sabour, Hassan Abdel
    MATERIALS, 2017, 10 (10):
  • [40] Hydroxyapatite Coatings Containing Mn and Si on the Oxidized Ti-6Al-4V Alloy for Dental Applications
    Kang, Jung-In
    Son, Mee-Kyoung
    Choe, Han-Cheol
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2018, 18 (02) : 833 - 836
12345