Effect of time on the formation of hydroxyapatite in PEO process with hydrothermal treatment of the Ti-6Al-4V alloy

被引：23
|
作者：
Kossenko, A. [1 ]
Lugovskoy, S. [1 ]
Astashina, N. [2 ]
Lugovskoy, A. [1 ]
Zinigrad, M. [1 ]
机构：
[1] Ariel Univ, IL-40700 Ariel, Israel
[2] Perm State Acad Med, Perm 614990, Russia
来源：
GLASS PHYSICS AND CHEMISTRY | 2013年 / 39卷 / 06期
关键词：
plasma electrolytic oxidation; hydroxyapatite; oxide layers; biomaterials; osseointegration; CALCIUM-PHOSPHATE; COATINGS; TITANIUM; DEPOSITION; OXIDATION;
D O I：
10.1134/S1087659613060072
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A titania layer containing calcium and phosphate with rough and porous structure was prepared by plasma electrolytic oxidation (PEO) and hydrothermal treatment (HT) at different time treatment. The most corresponding to the stoichiometry of hydroxiapatite ratio of Ca: P in the oxide layer can be achieved by the optimization of the electrolyte composition and the main parameters of PEO. While at the stage of PEO hydroxiaptite precursors are formed with only residual quantity of the hydroxyapatite, the subsequent hydrothermal treatment results in the formation of a much more pronounced hydroxyapatite phase.
引用
收藏
页码：639 / 642
页数：4
相关论文
共 50 条
  • [1] Effect of time on the formation of hydroxyapatite in PEO process with hydrothermal treatment of the Ti-6Al-4V alloy
    A. Kossenko
    S. Lugovskoy
    N. Astashina
    A. Lugovskoy
    M. Zinigrad
    Glass Physics and Chemistry, 2013, 39 : 639 - 642
  • [2] Formation of hydroxyapatite on Ti-6Al-4V alloy by microarc oxidation and hydrothermal treatment
    Liu, F
    Wang, FP
    Shimizu, T
    Igarashi, K
    Zhao, LC
    SURFACE & COATINGS TECHNOLOGY, 2005, 199 (2-3): : 220 - 224
  • [3] Hydroxyapatite coating on Ti-6Al-4V alloy by an electrolytic process and with heat-treatment
    Wang, Cheng-Li
    Shih, Wei-Jen
    Wang, Szu-Hao
    Chang, Kuo-Ming
    Li, Wang-Long
    Hon, Min-Hsiung
    Wang, Moo-Chin
    MULTISCALE, MULTIFUNCTIONAL AND FUNCTIONALLY GRADED MATERIALS, 2010, 631-632 : 407 - +
  • [4] Morphology and antimicrobial properties of hydroxyapatite-titanium oxide layers on the surface of Ti-6Al-4V alloy
    Lugovskoy, S.
    Weiss, D.
    Tsadok, U.
    Lugovskoy, A.
    SURFACE & COATINGS TECHNOLOGY, 2016, 301 : 80 - 84
  • [5] Effect of hydrothermal treatment on the surface characteristics and bioactivity of HAP based MAO coating on Ti-6Al-4V alloy
    Zhang, Yingpeng
    Luo, Sisi
    Wang, Qun
    Ramachandran, Chidambaram Seshadri
    SURFACE & COATINGS TECHNOLOGY, 2023, 464
  • [6] Effect of Bulk Phase Composition on the Growth of PEO Coatings on the Biomedical Ti-6Al-4V Alloy
    Neto, Jose Roberto Ferreira
    Ribeiro, Rafael Parra
    da Cruz, Nilson Cristino
    Rangel, Elidiane Cipriano
    Pinto, Bruna de Oliveira
    Torrento, Jhuliene Elen Muro
    Grandini, Carlos Roberto
    Kaneko, Ulisses Ferreira
    Correa, Diego Rafael Nespeque
    MATERIALS, 2025, 18 (05)
  • [7] Triggering the hydroxyapatite deposition on the surface of PEO-coated Ti-6Al-4V alloy via the dual incorporation of Zn and Mg ions
    Kaseem, Mosab
    Choe, Han-Choel
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 819 (819)
  • [8] The fabrication and characteristics of hydroxyapatite film grown on titanium alloy Ti-6Al-4V by anodic treatment
    Van-Thoai Nguyen
    Tsung-Chieh Cheng
    Te-Hua Fang
    Mu-Huan Li
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 4817 - 4825
  • [9] The effect of surface roughness on PEO-treated Ti-6Al-4V alloy and corrosion resistance
    Zhu, Linxin
    Petrova, Roumiana S.
    Gashinski, John P.
    Yang, Zunjian
    SURFACE & COATINGS TECHNOLOGY, 2017, 325 : 22 - 29
  • [10] Bioactive apatite formation on PEO-treated Ti-6Al-4V alloy after 3rd anodic titanium oxidation
    Lim, Sang-Gyu
    Choe, Han-Cheol
    APPLIED SURFACE SCIENCE, 2019, 484 : 365 - 373
12345