FABRICATION TECHNIQUE DEVELOPMENT OF DUAL FUNCTIONAL LITHIUM LEAD TEST BLANKET MODULE

被引：4
|
作者：
Li, Chunjing [1 ]
Huang, Bo [1 ]
Zhang, Junyu [1 ]
Zhai, Yutao [1 ]
Wu, Qingsheng [1 ]
Liu, Shaojun [1 ]
Huang, Qunying [1 ]
机构：
[1] Chinese Acad Sci, Inst Nucl Energy Safety Technol, Hefei 230031, Anhui, Peoples R China
来源：
FUSION SCIENCE AND TECHNOLOGY | 2014年 / 66卷 / 01期
关键词：
test blanket module; first wall; hot isostatic pressing; CONCEPTUAL DESIGN; CHINA; ITER; STEEL; TECHNOLOGIES; PROGRESS; STRATEGY; EAST;
D O I：
10.13182/FST13-769
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
China Low Activation Martensitic (CLAM) steel has been developed at Institute of Nuclear Energy Safety Technology under wide collaboration. Fabrication techniques for test blanket modules (TBMs) are being developed, and a 113 scale prototype is being fabricated. A 113 scale first wall (FW) mockup was fabricated by a one-step hot isostatic pressing (HIP) method with CLAM steel rectangular tubes and plates. Two cover plates and type L cooling plates were produced with strips and grooved plates using electron beam welding (EB) and HIP diffusion bonding. Also, the assembly routine of the FW cover plates and cooling plates and four back plates were pre-tested using solid plates. And, the FW, cooling plate and cover plates were non-destructively tested using dimensional measurements and ultrasonic wave tests, which showed preliminarily the feasibility of the fabrication process.
引用
收藏
页码：180 / 186
页数：7
相关论文
共 50 条
  • [1] First wall fabrication of 1/3 scale china dual functional lithium lead blanket
    Huang, Bo
    Zhai, Yutao
    Zhang, Junyu
    Li, Chunjing
    Wu, Qingsheng
    Huang, Qunying
    FUSION ENGINEERING AND DESIGN, 2014, 89 (7-8) : 1181 - 1185
  • [2] Transient Analysis on Helium Coolant Tube Break Accident of Dual-functional Lithium Lead Test Blanket Module
    Sun, Qian
    Peng, Tianji
    Zhou, Zhiwei
    Chen, Zhibin
    Jiang, Jieqiong
    PROCEEDINGS OF THE 24TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2016, VOL 2, 2016,
  • [3] Evaluation of electromagnetic forces on Chinese Dual Functional Lithium Lead Test Blanket Module in ITER
    Liu, Songlin
    Long, Pengcheng
    Wang, Weihua
    Huang, Qunying
    FUSION ENGINEERING AND DESIGN, 2010, 85 (10-12) : 2176 - 2180
  • [4] Thermo-Mechanical Analyses of the High Heat Flux Component for ITER Dual Functional Lithium Lead Test Blanket Module
    Chen Hongli
    Bai Yunqing
    PLASMA SCIENCE & TECHNOLOGY, 2009, 11 (02) : 236 - 240
  • [5] Preliminary safety analysis for the Chinese ITER Dual Functional Lithium-Lead Test Blanket Module
    Chen, Hongli
    Bai, Yunqing
    Hu, Liqin
    Chen, Mingliang
    Song, Yong
    Zeng, Qin
    Liu, Songlin
    NUCLEAR FUSION, 2009, 49 (07)
  • [6] Design analysis of the China dual-functional lithium lead (DFLL) test blanket module in ITER
    Wu, Y.
    FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 1893 - 1903
  • [7] Neutronics features of a dual coolant lithium lead test blanket module for ITER
    Sawan, M. E.
    Youssef, M. Z.
    21ST IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING - SOFE 05, 2006, : 275 - 278
  • [8] Design of auxiliary system for the dual functional lithium-lead test blanket module in ITER
    Zhang, ML
    Wu, YC
    Huang, QY
    He, XX
    Li, CJ
    FUSION ENGINEERING AND DESIGN, 2006, 81 (1-7) : 671 - 675
  • [9] Preliminary Probabilistic safety assessment of chinese dual-functional lithium lead-test blanket module for ITER
    Hu, L.
    Wu, Y.
    Wang, J.
    Wang, S.
    22ND IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, 2007, : 56 - 59
  • [10] Three-dimensional nuclear analysis for the US dual coolant lead lithium ITER test blanket module
    Sawan, M. E.
    Smith, B.
    Marriott, E. P.
    Wilson, P. P. H.
    FUSION ENGINEERING AND DESIGN, 2010, 85 (7-9) : 1027 - 1032
12345