Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

被引：55

作者：

He, Qiyang ^{[1
]}

Xia, Huanxiong ^{[1
]}

Liu, Jianhua ^{[1
]}

Ao, Xiaohui ^{[1
]}

Lin, Shengxiang ^{[1
]}

机构：

[1] Beijing Inst Technol, Sch Mech Engn, Beijing 100081, Peoples R China

来源：

MATERIALS & DESIGN | 2020年 / 196卷

基金：

中国国家自然科学基金;

关键词：

Selective laser melting; Additive manufacturing; Multiphase flow; Solidification; Heat transfer; POWDER-BED; POROSITY EVOLUTION; SINGLE TRACK; ENERGY INPUT; SIMULATION; MICROSTRUCTURE; MECHANISMS; PHYSICS; MULTILAYER; DYNAMICS;

D O I：

10.1016/j.matdes.2020.109115

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A multiphase and multi-physics model is developed for the selective laser melting process, where fluid flow, lidification, and heat transfer are included. The discrete-element and volume-of-fluid methods are applied generate the powder bed and capture the free surface of the melts, respectively. Physical behaviors like surface tension, Marangoni effect, vapor recoil, and radiation are considered. A strategy that the heat source is allowed adaptively following the free surface of a molten pool along with power leakage-free is developed for the moving laser. The fundamental characteristics of the molten pool and solidified tracks are found and analyzed. The remolten region between two neighboring tracks in the horizontal and vertical directions is predicted, and effects of the scanning spacing and laser power on the width and depth of the remolten region are investigated. The results indicate that both the dimensions of the molten pool and remolten region depend on the process rameters anisotropically, varying the laser energy input could change the dynamic regime of a molten pool, and the pore defect can appear between adjacent tracks when using a large scanning spacing. (c) 2020 The Author(s). Published by Elsevier Ltd.

引用

页数：11

共 40 条

[1] 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting [J].

Aboulkhair, Nesma T. ;

Simonelli, Marco ;

Parry, Luke ;

Ashcroft, Ian ;

Tuck, Christopher ;

Hague, Richard .

PROGRESS IN MATERIALS SCIENCE, 2019, 106

[2] Simulations of microstructure coupling with moving molten pool by selective laser melting using a cellular automaton [J].

Ao, Xiaohui ;

Xia, Huanxiong ;

Liu, Jianhua ;

He, Qiyang .

MATERIALS & DESIGN, 2020, 185

[3] Multiphysics modelling of lack-of-fusion voids formation and evolution in IN718 made by multi-track/multi-layer L-PBF [J].

Bayat, Mohamad ;

Mohanty, Sankhya ;

Hattel, Jesper Henri .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 139 :95-114

[4] Fluid and particle dynamics in laser powder bed fusion [J].

Bidare, P. ;

Bitharas, I. ;

Ward, R. M. ;

Attallah, M. M. ;

Moore, A. J. .

ACTA MATERIALIA, 2018, 142 :107-120

[5] Overview on Additive Manufacturing Technologies [J].

Calignano, Flaviana ;

Manfredi, Diego ;

Ambmbrosio, Elisa Paola ;

Biamino, Sara ;

Lombmbardi, Mariangela ;

Atzeni, Eleonora ;

Salmi, Alessandro ;

Minetola, Paolo ;

Iuliano, Luca ;

Fino, Paolo .

PROCEEDINGS OF THE IEEE, 2017, 105 (04) :593-612

[6] Mesoscopic-scale simulation of pore evolution during laser powder bed fusion process [J].

Cao, Liu .

COMPUTATIONAL MATERIALS SCIENCE, 2020, 179

[7] Numerical simulation of the impact of laying powder on selective laser melting single-pass formation [J].

Cao, Liu .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 141 :1036-1048

[8] Simulation of surface deformation control during selective laser melting of AlSi10Mg powder using an external magnetic field [J].

Chen, Liwei ;

Li, Hui ;

Liu, Sheng ;

Shen, Shengnan ;

Zhang, Tao ;

Huang, Yicang ;

Zhang, Guoqing ;

Zhang, Yunfan ;

He, Bo ;

Yang, Chongkun .

AIP ADVANCES, 2019, 9 (04)

[9] In-situ full-field mapping of melt flow dynamics in laser metal additive manufacturing [J].

Guo, Qilin ;

Zhao, Cang ;

Qu, Minglei ;

Xiong, Lianghua ;

Hojjatzadeh, S. Mohammad H. ;

Escano, Luis, I ;

Parab, Niranjan D. ;

Fezzaa, Kamel ;

Sun, Tao ;

Chen, Lianyi .

ADDITIVE MANUFACTURING, 2020, 31

[10] In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process [J].