Microstructure and phase composition evolution of dual-phase ytterbium silicate coatings plasma sprayed from stoichiometric Yb2Si2O7 feedstock powder

被引:19
作者
Wang, Haoyu [1 ,2 ]
Zhang, Jie [1 ]
Sun, Luchao [1 ]
Wang, Jingyang [1 ]
机构
[1] Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China
[2] Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China
关键词
Environmental barrier coating; Atmospheric plasma spray; Ytterbium disilicate; Phase evolution; Transmission electron microscopy; ENVIRONMENTAL BARRIER COATINGS; THERMAL-SHOCK BEHAVIOR; WATER-VAPOR CORROSION; THERMOMECHANICAL PROPERTIES; YB; DEGRADATION; MECHANISMS; RECESSION; OXIDATION; PROGRESS;
D O I
10.1016/j.surfcoat.2022.128373
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The main challenges of atmospheric plasma spraying (APS) when dealing with rare earth silicate are the amorphous phase formation and silica volatilization in as-sprayed coatings. In this study, the microstructure and phase composition evolution of dual-phase ytterbium silicate environmental barrier coatings (EBCs) plasma sprayed from stoichiometric Yb2Si2O7 feedstock powder are investigated. The unavoidable silica volatilization leads to the coating composition deviate from stoichiometry of disilicate composition and result in the presence of Yb2SiO5 in coatings. By controlling the phase fraction of Yb2SiO5 through modulation of plasma character allows minimizing the effects of thermal residual stress on the coating durability in thermal cycling. The high crystallinity and crack-free coatings were achieved through optimized crystallization heat treatment. The presence of dislocation and deformation twins endow the dual-phase coating with intrinsic quasi plasticity and improvement in reliability. The present study provides useful inspirations on the optimization of spraying parameters and design of advanced EBC systems.
引用
收藏
页数:10
相关论文
共 58 条
  • [1] Calcium-magnesium aluminosilicate (CMAS) reactions and degradation mechanisms of advanced environmental barrier coatings
    Ahlborg, Nadia L.
    Zhu, Dongming
    [J]. SURFACE & COATINGS TECHNOLOGY, 2013, 237 : 79 - 87
  • [2] Thermal Properties of Rare-Earth Monosilicates for EBC on Si-Based Ceramic Composites
    Al Nasiri, Nasrin
    Patra, Niranjan
    Horlait, Denis
    Jayaseelan, Daniel Doni
    Lee, William E.
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2016, 99 (02) : 589 - 596
  • [3] Detection of small delamination in mullite/Si/SiC model EBC system by pulse thermography
    Arai, Yutaro
    Inoue, Ryo
    [J]. JOURNAL OF ADVANCED CERAMICS, 2019, 8 (03) : 438 - 447
  • [4] High-velocity water vapor corrosion of Yb-silicate: Sprayed vs. sintered body
    Bakan, Emine
    Kindelmann, Moritz
    Kunz, Willy
    Klemm, Hagen
    Vassen, Robert
    [J]. SCRIPTA MATERIALIA, 2020, 178 : 468 - 471
  • [5] Effect of processing on high-velocity water vapor recession behavior of Yb-silicate environmental barrier coatings
    Bakan, Emine
    Sohn, Yoo Jung
    Kunz, Willy
    Klemm, Hagen
    Vassen, Robert
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2019, 39 (04) : 1507 - 1513
  • [6] Yb2Si2O7 Environmental Barrier Coatings Deposited by Various Thermal Spray Techniques: A Preliminary Comparative Study
    Bakan, Emine
    Marcano, Diana
    Zhou, Dapeng
    Sohn, Yoo Jung
    Mauer, Georg
    Vassen, Robert
    [J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2017, 26 (06) : 1011 - 1024
  • [7] Thermal properties of aluminum-graphite composites by powder metallurgy
    Chen, J. K.
    Huang, I. S.
    [J]. COMPOSITES PART B-ENGINEERING, 2013, 44 (01) : 698 - 703
  • [8] Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior
    Chen, Xiaowu
    Cheng, Guofeng
    Zhang, Junmin
    Guo, Feiyu
    Zhou, Haijun
    Liao, Chunjin
    Wang, Hongda
    Zhang, Xiangyu
    Dong, Shaoming
    [J]. JOURNAL OF ADVANCED CERAMICS, 2020, 9 (05) : 567 - 575
  • [9] A sintering model for plasma-sprayed zirconia TBCs. Part I: Free-standing coatings
    Cipitria, A.
    Golosnoy, I. O.
    Clyne, T. W.
    [J]. ACTA MATERIALIA, 2009, 57 (04) : 980 - 992
  • [10] A brick model for asperity sintering and creep of APS TBCs
    Cocks, Alan
    Fleck, Norman
    Lampenscherf, Stefan
    [J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2014, 63 : 412 - 431