Effect of Intercritical Annealing Time on the Microstructures and Tensile Properties of a High Strength TRIP Steel

被引:13
作者
Wang, Chao [1 ]
Ding, Hua [1 ,2 ]
Zhang, Jun [1 ]
Wu, Hongyan [2 ]
机构
[1] Northeastern Univ, Sch Met & Mat, Shenyang 110819, Peoples R China
[2] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China
基金
中国国家自然科学基金;
关键词
TRIP steel; Intercritical annealing; Carbon partitioning; Retained austenite; Stability; TRANSFORMATION-INDUCED-PLASTICITY; RETAINED AUSTENITE; MECHANICAL STABILITY; MULTIPHASE STEELS; CARBON; NB; ADDITIONS; CMNSI;
D O I
10.1007/s40195-014-0061-3
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
A new Mn-Si-Al-Mo-Nb transformation-induced plasticity steel was annealed by intercritical annealing for different durations to investigate the partitioning of C element and the volume fraction change of the microstructural constituents. Direct experimental evidence confirms the partitioning of C elements in different phases during heat treatment by Electron probe microanalysis and X ray diffraction. The distribution of the precipitates was investigated as well. It was revealed that the microstructures and mechanical properties of the investigated steels were affected by the intercritical annealing time. According to the present experiment, the volume fraction of retained austenite and the product of tensile strength and total elongation of investigated steel decrease with increasing intercritical annealing time. It was observed that high tensile strength of 1,103 MPa, total elongation of 21.3%, and strength-ductility product of 23,493.9 MPa % could be successfully produced in this experimental steel at intercritical annealing temperature of 830 degrees C, holding for 1 min, and isothermal bainite treatment of 440 degrees C for 5 min holding time.
引用
收藏
页码:457 / 463
页数:7
相关论文
共 28 条
  • [11] Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning
    Lee, Seawoong
    Lee, Seok-Jae
    De Cooman, Bruno C.
    [J]. SCRIPTA MATERIALIA, 2011, 65 (03) : 225 - 228
  • [12] Comments on "Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning" by S. Lee, SJ Lee and BC De Cooman, Scripta Materialia 65 (2011) 225-228
    Luo, Haiwen
    [J]. SCRIPTA MATERIALIA, 2012, 66 (10) : 829 - 831
  • [13] Effect of pre-straining and bake hardening on the microstructure of thermomechanically processed CMnSi TRIP steels with and without Nb and Mo additions
    Pereloma, E. V.
    Russell, K. F.
    Miller, M. K.
    Timokhina, I. B.
    [J]. SCRIPTA MATERIALIA, 2008, 58 (12) : 1078 - 1081
  • [14] Characterization of clusters and ultrafine precipitates in Nb-containing C-Mn-Si steels
    Pereloma, EV
    Timokhina, IB
    Russell, KF
    Miller, MK
    [J]. SCRIPTA MATERIALIA, 2006, 54 (03) : 471 - 476
  • [15] Characterization of Dual-Phase Steel Microstructure by Combined Submicrometer EBSD and EPMA Carbon Measurements
    Pinard, Philippe T.
    Schwedt, Alexander
    Ramazani, Ali
    Prahl, Ulrich
    Richter, Silvia
    [J]. MICROSCOPY AND MICROANALYSIS, 2013, 19 (04) : 996 - 1006
  • [16] Scott C., 2004, P INT C ADV HIGH STR, V7, P181
  • [17] A study of the carbon distribution in retained austenite
    Scott, C. P.
    Drillet, J.
    [J]. SCRIPTA MATERIALIA, 2007, 56 (06) : 489 - 492
  • [18] Strain-induced transformation of retained austenite in low-carbon low-silicon TRIP steel containing aluminum and vanadium
    Shi, Wen
    Li, Lin
    Yang, Chun-Xia
    Fu, Ren-Yu
    Wang, Li
    Wollants, Partick
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 429 (1-2): : 247 - 251
  • [19] FORMATION OF AUSTENITE DURING INTERCRITICAL ANNEALING OF DUAL-PHASE STEELS
    SPEICH, GR
    DEMAREST, VA
    MILLER, RL
    [J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (08): : 1419 - 1428
  • [20] Formability of Nb bearing ultra high-strength TRIP-aided sheet steels
    Sugimoto, Koh-Ichi
    Muramatsu, Toshiki
    Hashimoto, Shun-Ichi
    Mukai, Yoichi
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 177 (1-3) : 390 - 395