Effect of surface finishes on ball shear strength in BGA joints with Sn-3.5 mass% Ag solder

被引：34

作者：

Lee, CB ^{[1
]}

Lee, IY ^{[1
]}

Jung, SB ^{[1
]}

Shur, CC ^{[1
]}

机构：

[1] Sungkyunkwan Univ, Dept Adv Mat Engn, Jangan Ku, Suwon 440746, South Korea

来源：

MATERIALS TRANSACTIONS | 2002年 / 43卷 / 04期

关键词：

ball shear test; reliability; fracture surface; ball grid array (BGA) joint; isothermal aging;

D O I：

10.2320/matertrans.43.751

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The present Study is aimed at the assessment on the reliability of solder ball attachment to the bond pads of BGA substrate with various plating schemes. The reliability of solder ball attachment is characterized by mechanical ball shear tests. In addition to the ball shear tests, SEM is performed to inspect the cross-section and the fracture surface of the tested specimens for failure analysis. The aging was conducted in convection ovens in air at 343, 393, 423 and 443 K respectively for times ranging 8.64 x 10(4) to 864 x 10(4) s, Without regard to the deposited layer, the shear strength of BGA joints decreased with the increasing temperature and time. After isothermal aging. the fracture surface shows various characteristics depending on aging temperature and time, and the types of BGA pad.

引用

页码：751 / 756

页数：6

共 20 条

[1] The influence of test parameters and package design features on ball shear test requirements [J].

Coyle, RJ ;

Solan, PP .

TWENTY SIXTH IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY SYMPOSIUM, PROCEEDINGS, 2000, :168-177

[2]

COYLE RJ, 1999, P 24 IEEE CPMT EL MA, P23

[3]

ERICH R, 1999, P 24 IEEE CPMT INT E, P16

[4] Interfacial microstructure and the kinetics of interfacial reaction in diffusion couples between Sn-Pb solder and Cu/Ni/Pd metallization [J].

Ghosh, G .

ACTA MATERIALIA, 2000, 48 (14) :3719-3738

[5] Reaction kinetics of solder-balls with pads in BGA packages during reflow soldering [J].

Ho, CE ;

Chen, YM ;

Kao, CR .

JOURNAL OF ELECTRONIC MATERIALS, 1999, 28 (11) :1231-1237

[6]

Houghton FDB, 2000, CIRCUIT WORLD, V26, P10, DOI 10.1108/03056120010310882

[7]

HUNG SC, 1999, P 24 IEEE CPMT INT E, P7

[8] Solder reaction-assisted crystallization of electroless Ni-P under bump metallization in low cost flip chip technology [J].

Jang, JW ;

Kim, PG ;

Tu, KN ;

Frear, DR ;

Thompson, P .

JOURNAL OF APPLIED PHYSICS, 1999, 85 (12) :8456-8463

[9]

LAU JH, 1995, BALL GRID ARRAY TECH, P400

[10] The effect of Bi concentration on wettability of Cu substrate by Sn-Bi solders [J].

Lee, CB ;

Jung, SB ;

Shin, YE ;

Shur, CC .

MATERIALS TRANSACTIONS, 2001, 42 (05) :751-755

← 1 2 →