Thermo-mechanical properties carbide composites fabricated and microstructure of silicon by nano-infiltrated transient eutectoid process

被引：123

作者：

Katoh, Y ^{[1
]}

Dong, SM

Kohyama, A

机构：

[1] Kyoto Univ, Inst Adv Energy, Kyoto 6110011, Japan

[2] Japan Sci & Technol Corp, CREST, Kawaguchi, Japan

来源：

FUSION ENGINEERING AND DESIGN | 2002年 / 61-62卷

关键词：

SiC/SiC composite; mechanical property; thermal property; fracture property;

D O I：

10.1016/S0920-3796(02)00180-1

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

Silicon carbide (SiC) fiber-reinforced SiC-matrix ceramic composites (SiC/SiC composites) produced through transient liquid-phase sintering process were evaluated in terms of microstructures and baseline thermo-mechanical properties for potential application to fusion blanket/first wall structures. The composites produced by a technique incorporating a nano-infiltration and the optimized transient eutectic phase process demonstrated strength, fracture behavior, thermal conductivity and microstructure which are promising for applications in fusion blankets. (C) 2002 Elsevier Science B.V. All rights reserved.

引用

页码：723 / 731

页数：9

共 12 条

[1] DONG SM, UNPUB J AM CERAM SOC
[2] High-temperature compressive creep of liquid phase sintered silicon carbide
Gallardo-López, A
Muñoz, A
Martínez-Fernández, J
Domínguez-Rodríguez, A
[J]. ACTA MATERIALIA, 1999, 47 (07) : 2185 - 2195
[3] HIROHATA Y, 2002, FUSION ENG DES, V61
[4] KELLY A, 2000, COMPREHENSIVE COMPOS, V4
[5] KOHYAMA A, 1998, P 8 EUR C COMP MAT, V4, P15
[6] HOT-PRESSING BEHAVIOR OF SILICON-CARBIDE POWDERS WITH ADDITIONS OF ALUMINUM-OXIDE
LANGE, FF
[J]. JOURNAL OF MATERIALS SCIENCE, 1975, 10 (02) : 314 - 320
[7] NAKANO K, 1989, DEV SCI TECHNOLOGY C
[8] NOZAWA T, IN PRESS ASTM STP, V1418
[9] Processing, microstructure and mechanical properties of hot-pressed SiC continuous fibre/SiC composites
Park, K
Vasilos, T
[J]. JOURNAL OF MATERIALS SCIENCE, 1997, 32 (02) : 295 - 300
[10] *ROAM HAAS CO, CVD SIL CARB TEMP DE

← 1 2 →