Experimentally derived resistivity for dielectric samples from the CRRES internal discharge monitor

被引:20
作者
Green, Nelson Wesley
Frederickson, Arthur Robb
Dennison, J. R.
机构
[1] CALTECH, Jet Prop Lab, Reliabil Engn Off, Pasadena, CA 91109 USA
[2] Utah State Univ, Dept Phys, Logan, UT 84322 USA
关键词
conductivity; dielectric; materials testing; resistivity; spacecraft charging; space environment effects;
D O I
10.1109/TPS.2006.883372
中图分类号
O35 [流体力学]; O53 [等离子体物理学];
学科分类号
070204 ; 080103 ; 080704 ;
摘要
Resistivity values were experimentally determined using charge-storage methods for six samples remaining from the construction of the internal discharge monitor flown on the Combined Release and Radiation Effects Satellite (CRRES). Three tests were performed over a period of three to five weeks each in a vacuum of similar to 5 x 10(-6) torr with an average temperature of similar to 25 degrees C to simulate a space environment. Samples tested included FR4, polytetrafluoroethylene (PTFE), and alumina with copper electrodes attached to one or more of the sample surfaces. FR4 circuit-board material was found to have a dark-current resistivity of similar to 1 x 10(18) Omega (.) cm and a moderately high polarization current. Fiber-filled PTFE exhibited little polarization current and a dark-current resistivity of similar to 3 x 10(20) Omega (.) cm. Alumina had a measured dark-current resistivity of similar to 3 (.) 10(17) Omega (.) cm, with a very large and more rapid polarization. Experimentally determined resistivity values were two to three orders of magnitude more than found using standard American Society for Testing and Materials (ASTM) test methods. The 1-min wait time suggested for the standard ASTM tests is much shorter than the measured polarization current-decay times for each sample indicating that the primary currents used to determine ASTM resistivity are caused by the polarization of molecules in the applied electric field rather than charge transport through the bulk of the dielectric. Testing over much longer periods of time in vacuum is required to allow this polarization current to decay away and to allow the observation of charged-particle transport through a dielectric material. Application of a simple physics-based model allows separation of the polarization current and dark-current components from long-duration measurements of resistivity over day- to month-long time scales. Model parameters are directly related to the magnitude of charge transfer and storage and the rate of charge transport.
引用
收藏
页码:1973 / 1978
页数:6
相关论文
共 17 条
[1]  
[Anonymous], D25799 ASTM
[2]  
*ASTM, 1999, D1867 ASTM
[3]  
BEILBY RM, 2004, P IEEE INT C SOL DIE, P936
[4]  
Dennison J. R., 2003, P 8 SPAC CHARG TECHN
[5]  
DENNISON JR, IN PRESS IEEE T PLAS
[6]  
DENNISON JR, 2005, TEST PROTOCOL CHARGE
[7]  
DENNISON JR, 2005, MEASUREMENT CHARGE S
[8]  
Frederickson A. R., 2004, NASACR2004213228 MAR
[9]   Measurement of conductivity and charge storage in insulators related to spacecraft charging [J].
Frederickson, AR ;
Dennison, JR .
IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 2003, 50 (06) :2284-2291
[10]   Measurement of charge storage and leakage in polyimides [J].
Frederickson, AR ;
Benson, CE ;
Bockman, JF .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2003, 208 :454-460