Comparison of the discrete element and finite element methods to model the interaction of soil and tool cutting edge

Soil tillage is an energy intensive operation and design improvements that reduce forces have been pursued for many different tools. Due to the high cost of prototyping and testing, computer modelling has been adopted to design tillage equipment. In order to model soil tool interaction two methods namely; finite element method (FEM) and discrete element method (DEM) have been used. Fielke (1994 and 1996) found that for shallow working low rake angle tools the cutting edge geometry of a tillage tool has a major effect on tillage forces and soil movement. FEM modelling of the tests was also carried out in Fielke (1999). In this paper the experimental work of Fielke (1994) was simulated using DEM techniques and the results were compared to both the measured data and FEM predicted results. The results of the study showed that better vertical force prediction was obtained using DEM whereas forward soil movements below the tillage depth were simulated more accurately using FEM. This can be attributed to the larger size of particles used in DEM simulation than needed to pass around the cutting edge. It was also shown that DEM can be used to accurately predict soil failure planes. (C) 2018 IAgrE. Published by Elsevier Ltd. All rights reserved.