A model of burr formation in the feed direction in turning

被引：33

作者：

Toropov, Andrey ^{[1
]}

Ko, Sung-Lim ^{[1
]}

机构：

[1] Konkuk Univ, Sch Mech & Aerosp Engn, Ctr Adv E Syst Integrat Technol, Seoul 143701, South Korea

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2006年 / 46卷 / 15期

关键词：

model; burr; feed direction; turning;

D O I：

10.1016/j.ijmachtools.2006.01.035

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper proposes a model of the burr formation mechanism when burrs are formed in the feed direction during turning operation. Two cases have been considered in this study: continuous burr development, when the burr grows uninterruptedly; and discontinuous development, when the burr being formed is cut off and is renewed with each revolution of the workpiece. The model allows predicting burr height and thickness, and is able to simulate burr development. Experimental verification of the model was carried out during turning of aluminum alloy A16061-T6. It was confirmed through the experiment that burr thickness can be predicted with considerable accuracy and that burr height can be determined with a maximum error of about 30%. The experiment also proved that the model is suitable for the description of burr development in both continuous and discontinuous cases of burr formation. (c) 2006 Elsevier Ltd. All rights reserved.

引用

页码：1913 / 1920

页数：8

共 50 条

[21] A study on the shearing process and the burr formation of zircaloy-4 sheet by using GTN model [J].

Hyunsoo Jeong ;

Jisun Ha ;

Jihoon Hwang ;

Hyungyil Lee ;

Dongchul Kim ;

Naksoo Kim .

International Journal of Precision Engineering and Manufacturing, 2014, 15 :2167-2175

[22] Mechanics of chip, delamination, and burr formation in drilling supported woven GFRP composites [J].

Khashaba, U. A. .

ALEXANDRIA ENGINEERING JOURNAL, 2023, 79 :181-195

[23] A Study on the Shearing Process and the Burr Formation of Zircaloy-4 Sheet by using GTN Model [J].

Jeong, Hyunsoo ;

Ha, Jisun ;

Hwang, Jihoon ;

Lee, Hyungyil ;

Kim, Dongchul ;

Kim, Naksoo .

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2014, 15 (10) :2167-2175

[24] INVESTIGATION OF MACHINING PARAMETERS FOR BURR MINIMIZATION IN CNC TURNING OF BRASS USING RSM AND GA [J].

Ravikumar, R. ;

Hafeez, M. Mohamed Abdul .

ADVANCED DEVELOPMENT IN INDUSTRY AND APPLIED MECHANICS, 2014, 627 :54-+

[25] Simulation of burr formation during machining: case study [J].

Zebala, Wojciech ;

Rumian, Ksenia .

PHOTONICS APPLICATIONS IN ASTRONOMY, COMMUNICATIONS, INDUSTRY, AND HIGH-ENERGY PHYSICS EXPERIMENTS 2018, 2018, 10808

[26] Interfacial Burr Formation in Drilling of Stacked Aerospace Materials [J].

Melkote, S. N. ;

Newton, T. R. ;

Hellstern, C. ;

Morehouse, J. B. ;

Turner, S. .

BURRS - ANALYSIS, CONTROL AND REMOVAL: PROCEEDINGS OF THE CIRP INTERNATIONAL CONFERENCE ON BURRS, 2009, 2010, :89-+

[27] Influence of size effect on burr formation in micro cutting [J].

Zhang, Tao ;

Liu, Zhanqiang ;

Xu, Chonghai .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 68 (9-12) :1911-1917

[28] Burr formation in short hole drilling by ultrasonic assistance [J].

Heisel, Uwe ;

Stehle, Thomas ;

Schaal, Michael ;

Eisseler, Rocco .

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2014, 8 (1-2) :1-6

[29] Researches on Burr Formation in Milling Al-Alloy [J].

Chen, Ming ;

Rong, Bin ;

Liu, Gang .

SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 :164-+

[30] Determination of the optimal milling feed direction for unidirectional CFRPs using a predictive cutting-force model [J].

Dong-Gyu Kim ;

Yun-Chul Jung ;

Sung-Hwan Kweon ;

Seung-Han Yang .

The International Journal of Advanced Manufacturing Technology, 2022, 123 :3571-3585

← 1 2 3 4 5 →