Influence of length of glass fibers in recycled polypropylene on tensile properties

被引：0

作者：

Senkerik, Vojtech ^{[1
]}

Stanek, Michel ^{[1
]}

Manas, David ^{[1
]}

Manas, Miroslav ^{[1
]}

Janostik, Vaclav ^{[1
]}

Ovsik, Martin ^{[1
]}

机构：

[1] Tomas Bata Univ Zlin, Nam TG Masaryka 5555, Zlin 76001, Czech Republic

来源：

20TH INTERNATIONAL CONFERENCE ON CIRCUITS, SYSTEMS, COMMUNICATIONS AND COMPUTERS (CSCC 2016) | 2016年 / 76卷

关键词：

D O I：

10.1051/matecconf/20167602021

中图分类号：

TP301 [理论、方法];

学科分类号：

081202 ;

摘要：

The purpose of this article is to show the influence of grinded glass fibers in polymer material. Tested samples were processed by injection molding. Waste from this production was subsequently ground and a mixture was obtained with different size of crushed material. These particles contains glass fibers of similar length as the specific size of particle. Thus very small particles contain very short fibers. Investigation was carried out by testing tensile properties on material polypropylene with 30% glass fibers. Testing was conducted at ambient temperatures. The effect of reprocessing of material is mainly represented by fiber shortening. As a result, considerable reduction of tensile properties can be observed. The reduction is most evident in the modules of elasticity and ultimate tensile strength.

引用

页数：4

共 50 条

[21] Influence of the composition of polypropylene/organoclay nanocomposite fibers on their tensile strength [J].

Mlynarcíková, Z ;

Borsig, E ;

Legén, J ;

Marcincin, A ;

Alexy, P .

JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY, 2005, A42 (05) :543-554

[22] Investigation of the Fiber Length and the Mechanical Properties of Waste Recycled from Continuous Glass Fiber-Reinforced Polypropylene [J].

MohammadKarimi, Shiva ;

Neitzel, Benedikt ;

Lang, Maximilian ;

Puch, Florian .

RECYCLING, 2023, 8 (06)

[23] Tensile and Fatigue Evaluation of a Glass Reinforced Recycled Nylon Blend: Effect of Polypropylene Contamination [J].

Zhang, Ying ;

Bates, Philip J. ;

DuQuesnay, David L. .

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2016, 55 (04) :414-422

[24] Influence of coupling agents in the preparation of polypropylene composites reinforced with recycled fibers [J].

Franco-Marques, E. ;

Mendez, J. A. ;

Pelach, M. A. ;

Vilaseca, F. ;

Bayer, J. ;

Mutje, P. .

CHEMICAL ENGINEERING JOURNAL, 2011, 166 (03) :1170-1178

[25] Influence of pulping conditions on the properties of recycled fibers [J].

Law, K. N. ;

Song, X. L. ;

Daneault, C. .

CELLULOSE CHEMISTRY AND TECHNOLOGY, 2006, 40 (05) :335-343

[26] Effect of Span Length on the Tensile Properties of Natural Fibers [J].

Biswas, S. ;

Ahsan, Q. ;

Verpoest, I. ;

Hasan, M. .

ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 :445-+

[27] The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene .2. Thermal properties [J].

Thomason, JL ;

Groenewoud, WM .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1996, 27 (07) :555-565

[28] Effects of Polypropylene Fibers on the Physical and Mechanical Properties of Recycled Aggregate Concrete [J].

Pierre Matar ;

Gérard-Philippe Zéhil .

Journal of Wuhan University of Technology-Mater. Sci. Ed., 2019, 34 :1327-1344

[29] Effects of Polypropylene Fibers on the Physical and Mechanical Properties of Recycled Aggregate Concrete [J].

Matar, Pierre ;

Zehil, Gerard-Philippe .

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2019, 34 (06) :1327-1344

[30] Effects of Polypropylene Fibers on the Physical and Mechanical Properties of Recycled Aggregate Concrete [J].

Pierre Matar ;

GrardPhilippe Zhil .

Journal of Wuhan University of Technology(Materials Science), 2019, 34 (06) :1327-1344

← 1 2 3 4 5 →