Laser surface alloying with carbon on 15-5PH steel for improved wear resistance

被引：14
作者：
Zhang, Bo [1 ,2 ]
Wang, Huaming [1 ,2 ,3 ,4 ]
Chen, Rui [1 ,2 ]
He, Bei [1 ,2 ,3 ,4 ]
Cao, Yinggang [1 ,2 ]
Liu, Dong [1 ,2 ,3 ]
机构：
[1] Beihang Univ, Sch Mat Sci & Engn, Natl Engn Lab Addit Mfg Large Metall Components, 37 Xueyuan Rd, Beijing, Peoples R China
[2] Beihang Univ, Sch Mat Sci & Engn, Engn Res Ctr, Minist Educ Laser Direct Mfg Large Metall Compone, 37 Xueyuan Rd, Beijing, Peoples R China
[3] Beihang Univ, Res Inst Frontier Sci, 37 Xueyuan Rd, Beijing, Peoples R China
[4] Beihang Univ, Ningbo Inst Technol, Ningbo 315100, Peoples R China
来源：
SURFACE ENGINEERING | 2021年 / 37卷 / 05期
基金：
国家重点研发计划;
关键词：
Laser surface alloying; 15-5PH steel; microstructure; microhardness; wear resistance; 17-4PH STAINLESS-STEEL; MECHANICAL-PROPERTIES; EUTECTIC CARBIDES; MICROSTRUCTURE; AUSTENITE; EVOLUTION; TEMPERATURE; BEHAVIOR;
D O I：
10.1080/02670844.2020.1840758
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Supersaturated carbon alloying layer was prepared on the surface of 15-5PH stainless steel using laser surface alloying technology with carbon powders as alloying materials. XRD, optical microscope, scanning electron microscope, microhardness test and wear test were performed to characterize the microstructure and wear resistance of substrate and alloying layer. Results showed that the alloying layer was rapidly solidified dendritic structure with phase compositions of high-carbon austenite and a small amount of martensite and M7C3 carbides. Microhardness of the alloying layer reached about 510 HV, which was 38.7% higher than that of the as-deposited substrate (375 HV). Carbon supersaturated solid solution strengthening and microstructure refinement strengthening were the main reasons for a substantial increase in alloying layer microhardness. After direct aging treatment, microhardness of the alloying layer further increased to nearly 640 HV. Wear test results showed that the mass loss of the aging alloying layer was about 60% lower than that of the aging substrate, which meant significantly improvement of wear resistance.
引用
收藏
页码：669 / 677
页数：9
相关论文
共 43 条
[11]   The effect of cladding speed on phase constitution and properties of AISI 431 stainless steel laser deposited coatings [J].
Hemmati, I. ;
Ocelik, V. ;
De Hosson, J. Th. M. .
SURFACE & COATINGS TECHNOLOGY, 2011, 205 (21-22) :5235-5239
[12]   MICROSTRUCTURE OF RAPIDLY SOLIDIFIED MATERIALS [J].
JONES, H .
MATERIALS SCIENCE AND ENGINEERING, 1984, 65 (01) :145-156
[13]  
Kaiming W, 2016, SURF ENG, V34
[14]  
Kc S, 2019, WEAR, V440-441
[15]   Wear resistance improvement of austenitic 316L steel by laser alloying with boron [J].
Kulka, M. ;
Mikolajczak, D. ;
Makuch, N. ;
Dziarski, P. ;
Miklaszewski, A. .
SURFACE & COATINGS TECHNOLOGY, 2016, 291 :292-313
[16]   ADHESION WEAR MECHANISMS UNDER DRY FRICTION OF TITANIUM-ALLOYS IN VACUUM [J].
LEBEDEVA, IL ;
PRESNYAKOVA, GN .
WEAR, 1991, 148 (02) :203-210
[17]  
Li W, 2009, MOULD MANUF, V9
[18]   Improvement of wear and corrosion resistances of 17-4PH stainless steel by plasma nitrocarburizing [J].
Liu, R. L. ;
Yan, M. F. .
MATERIALS & DESIGN, 2010, 31 (05) :2355-2359
[19]   Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding [J].
Lu, J. Z. ;
Cao, J. ;
Lu, H. F. ;
Zhang, L. Y. ;
Luo, K. Y. .
SURFACE & COATINGS TECHNOLOGY, 2019, 369 :228-237
[20]  
MAJUMDAR JD, 2013, INT MATER REV, V56, P341
12345