Effects of rapid thermal annealing on the morphology and electrical properties of ZnO/In films

Zinc oxide (ZnO) films were prepared by ultrasonic spray pyrolysis on indium (In) films deposited by evaporation and subsequently subjected to rapid thermal annealing (RTA) in air or vacuum. The crystallographic properties and surface morphology of the films were characterized before and after RTA by X-ray diffraction and scanning electron microscopy, respectively. The variation in resistivity of the films with RTA temperature and time was measured by the four-point probe method. Auger electron spectroscopy (AES) was carried out to determine the distribution of indium atoms in the ZnO films. The resistivity of the ZnO on In (ZnO/In) films decreased to 2 X 10(-3) Omega cm by diffusion of the In. Indium diffusion into the ZnO films roughened the film surface. The results of depth profiling by AES showed a hump of In atoms around ZnO/In interface after RTA at 800 degreesC, which disappeared on RTA at 1000 degreesC. The effects of temperature, time and atmosphere during RTA on the structural and electrical proper-ties of the ZnO/In films are discussed. (C) 2002 Elsevier Science B.V. All rights reserved.