Effects of Nonconventional Tools on the Thermo-Mechanical Response of Friction Stir Welded Materials

被引：11
|
作者：
Lampeas, George N. [1 ]
Diamantakos, Ioannis D. [1 ]
机构：
[1] Univ Patras, Dept Mech Engn & Aeronaut, Lab Technol & Strength Mat, Patras 26500, Greece
来源：
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | 2015年 / 137卷 / 05期
关键词：
friction stir welding; welding simulation; unconventional FSW tool; residual stresses; distortion; HEAT; STEEL;
D O I：
10.1115/1.4029857
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An investigation on the effect of two alternative friction stir welding (FSW) tool designs, namely, Bobbin tool and DeltaN tool, on the temperature profile, residual stress (RS), and distortion fields developing during FSW process is presented. The study is based on the semi-analytical calculation of the total heat generated during FSW. Subsequently, the calculated heat energy is applied as thermal load in a three-dimensional finite element (FE) thermo-mechanical model for the calculation of temperature history, RSs, and distortions. The overall methodology is validated through the comparison of the numerical results to respective experimental temperature measurements and distortions observations.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] FEM model for the thermo-mechanical characterization of friction stir spot welded joints
    D'Urso, G.
    Giardini, C.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2016, 9 (02) : 149 - 160
  • [2] FEM model for the thermo-mechanical characterization of friction stir spot welded joints
    G. D’Urso
    C. Giardini
    International Journal of Material Forming, 2016, 9 : 149 - 160
  • [3] Thermo-mechanical modeling of friction stir welding
    Azimzadegan, T.
    Serajzadeh, S.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2010, 101 (03) : 390 - 397
  • [4] Thermo-mechanical processing in friction stir welds
    Schneider, JA
    Nunes, AC
    FRICTION STIR WELDING AND PROCESSING II, 2003, : 43 - 51
  • [5] Thermo-mechanical history of a friction stir welded plate; Influence of the mechanical loading on the residual stress distribution
    Paun, F
    Azouzi, A
    MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS 1 AND 2, 2004, 712 : 1197 - 1202
  • [6] Coupled thermo-mechanical modelling of friction stir welding
    Li, Hongjun
    Mackenzie, Donald
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2007, VOL 5, 2008, : 193 - 201
  • [7] Thermo-mechanical Modelling of Friction Stir Welding Process
    He, Xiaocong
    ADVANCED TECHNOLOGIES IN MANUFACTURING, ENGINEERING AND MATERIALS, PTS 1-3, 2013, 774-776 : 1155 - 1159
  • [8] A COUPLED THERMO-MECHANICAL MODEL OF FRICTION STIR WELDING
    Veljic, Darko M.
    Perovic, Milenko M.
    Sedmak, Aleksandar S.
    Rakin, Marko P.
    Trifunovic, Miroslav V.
    Bajic, Nikola S.
    Bajic, Darko R.
    THERMAL SCIENCE, 2012, 16 (02): : 527 - 534
  • [9] Thermo-mechanical response of aluminum alloy in the additive friction-stir deposition process
    Alam, Chowdhury Sadid
    Karami, Vahid
    Guo, Shengmin
    Rahman, M. Shafiqur
    ADDITIVE MANUFACTURING LETTERS, 2025, 12
  • [10] A fully coupled thermo-mechanical model of friction stir welding
    Zhang, Z.
    Zhang, H. W.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 37 (3-4): : 279 - 293
12345