A theoretical model to study the cutting force characteristics in remanufacturing turning of laser cladded coatings

被引:4
作者
Zhang, Peirong [1 ]
Du, Jin [1 ]
Zhang, Jingjie [1 ]
Su, Guosheng [1 ]
Xu, Chonghai [1 ]
机构
[1] Qilu Univ Technol, Sch Mech & Automot Engn, Shandong Acad Sci, Jinan 250353, Peoples R China
基金
中国国家自然科学基金;
关键词
Laser cladded coating; Remanufacturing turning; Cutting force; Coarse profile; Roughing and finishing;
D O I
10.1007/s00170-021-06681-8
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
Subtractive machining is required for laser cladded coatings to improve surface quality. However, cutting force performs distinctively due to the coarse profile and structural properties of the laser cladded coatings. The coarse profile of the laser cladded coatings resulted in variable depth of cut in rough turning, while the vibration caused the fluctuations of cutting force in finish turning. In this research, the cutting force characteristics in remanufacturing turning of the laser cladded coatings are investigated. Firstly, cutting force model was established by considering the coarse profile as well as cutting vibration. The experimental results further confirmed that the presented model could predict the cutting forces in remanufacturing processes. Secondly, the effects of the coarse profile and cutting vibration on cutting forces were analyzed based on the presented model. The rough profile is prone to cause tool breakage in rough turning, while the cutting vibration generated great influence on radial force component in finish turning. The results suggested that the rough turning needed to be divided into multiple passes for peeling-off, and the stiffness should be enhanced to reduce cutting vibration in finish turning.
引用
收藏
页码:757 / 769
页数:13
相关论文
共 34 条
[1]   Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization [J].
Aouici, Hamdi ;
Yallese, Mohamed Athmane ;
Chaoui, Kamel ;
Mabrouki, Tarek ;
Rigal, Jean-Francois .
MEASUREMENT, 2012, 45 (03) :344-353
[2]   New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V [J].
Bermingham, M. J. ;
Kirsch, J. ;
Sun, S. ;
Palanisamy, S. ;
Dargusch, M. S. .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2011, 51 (06) :500-511
[3]   Cutting conditions optimization when turning overlays [J].
Brozek, M .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 168 (03) :488-495
[4]   Study on the Machining of Iron-Based Thermal Spray Coating for Sleeveless Engine Cylinder [J].
Ding Kan ;
Sasahara Hiroyuki .
ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 :991-996
[5]   Investigation on the Cutting Process of Plasma Sprayed Iron Base Alloys [J].
Ding, Kan ;
Sasahara, Hiroyuki ;
Adachi, Syuji ;
Nishimura, Kimio .
ADVANCED PRECISION ENGINEERING, 2010, 447-448 :821-+
[6]   Optimizing the use of dry cutting in rough turning steel operations [J].
Diniz, AE ;
de Oliveira, AJ .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (10) :1061-1067
[7]   Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel [J].
Fnides, B. ;
Yallese, M. A. ;
Mabrouki, T. ;
Rigal, J-F .
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2011, 36 (01) :109-123
[8]   Analytical modeling of chatter vibration in orthogonal cutting using a predictive force model [J].
Fu, Zhongtao ;
Zhang, Xiaoming ;
Wang, Xuelin ;
Yang, Wenyu .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2014, 88 :145-153
[9]   Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts [J].
Gaitonde, V. N. ;
Karnik, S. R. ;
Figueira, Luis ;
Davim, J. Paulo .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (04) :754-763
[10]   Analysis of cutting force signals by wavelet packet transform for surface roughness monitoring in CNC turning [J].
Garcia Plaza, E. ;
Nunez Lopez, P. J. .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, 98 :634-651