EDS CONTAINMENT VESSEL EXPLOSIVE TEST AND ANALYSIS

被引：0

作者：

Crocker, Robert W. ^{[1
]}

Haroldsen, Brent L. ^{[1
]}

Stofleth, Jerome H. ^{[2
]}

Yip, Mien ^{[1
]}

机构：

[1] Sandia Natl Labs, Livermore, CA 94551 USA

[2] Sandia Natl Labs, POB 5800, Albuquerque, NM 87185 USA

来源：

PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 4 | 2017年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This report documents the results of two of tests that were performed on an explosive containment vessel at Sandia National Laboratories in Albuquerque, New Mexico in July 2013 to provide some deeper understanding of the effects of charge geometry on the vessel response [1]. The vessel was fabricated under Code Case 2564 of the ASME Boiler and Pressure Vessel Code, which provides rules for the design of impulsively loaded vessels [2]. The explosive rating for the vessel, based on the Code Case, is nine (9) pounds TNT equivalent. One explosive test consisted of a single, centrally located, 7.2 pound bare charge of Composition C-4 (equivalent to 9 pounds TNT). The other test used six each 1.2 pound charges of Composition C-4 (7.2 pounds total) distributed in two bays of three.

引用

页数：8