Experimental investigation and constitutive modelling of the deformation behaviour of high impact polystyrene for plug-assisted thermoforming

被引：7
作者：
Atmani, Oualid [1 ,2 ]
Abbes, Fazilay [1 ]
Li, Yuming [1 ]
Batkam, Serge [2 ]
Abbes, Boussad [1 ]
机构：
[1] Univ Reims, MATIM, UFR Sci, Campus Moulin Housse, F-51100 Reims, France
[2] PACK 3 0, Domaine Villemorant, F-41210 Neung Sur Beuvron, France
来源：
MECHANICS & INDUSTRY | 2020年 / 21卷 / 06期
关键词：
Plug-assisted thermoforming; finite element modelling; high impact polystyrene; inverse parameter identification; thermomechanical behaviour; WALL-THICKNESS DISTRIBUTION; SIMULATION; FRICTION; POLYPROPYLENE; POLYMERS; SHEETS;
D O I：
10.1051/meca/2020084
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper concerns the experimental and numerical study of the plug-assisted thermoforming process of high impact polystyrene (HIPS). The thermomechanical properties of this polymer were characterized at different temperatures and deformation rates. To study the influence of different parameters in the real conditions of plug-assisted thermoforming process, we carried out "plug-only" tests at different temperatures and plug velocities. To model the deformation behaviour of HIPS, we proposed a thermo-elastic-viscoplastic model, which we have implemented in Abaqus software. A thermo-dependent friction model was also proposed and implemented in Abaqus software. The parameters of the proposed models were identified by the inverse analysis method in the real conditions of plug-assisted thermoforming. The proposed models were validated with "plug-only" tests and plug-assisted thermoforming of yogurt container.
引用
收藏
页数：12
相关论文
共 43 条
  • [1] Experimental and numerical study of the aging effects of sorption conditions on the mechanical behaviour of polypropylene bottles under columnar crush conditions
    Abbes, Boussad
    Zaki, Oussama
    Safa, Laurent
    [J]. POLYMER TESTING, 2010, 29 (07) : 902 - 909
  • [2] Modelling of the degradation of mechanical properties of high-density polyethylene based-packaging exposed to amyl acetate solution
    Abbes, Fazilay
    Ngoc Giang Tran
    Abbes, Boussad
    Guo, Ying-Qiao
    [J]. POLYMER TESTING, 2017, 59 : 449 - 461
  • [3] Wall thickness distribution in plug-assist vacuum formed strawberry containers
    Aroujalian, A
    Ngadi, MO
    Emond, JP
    [J]. POLYMER ENGINEERING AND SCIENCE, 1997, 37 (01) : 178 - 182
  • [4] A 3-DIMENSIONAL CONSTITUTIVE MODEL FOR THE LARGE STRETCH BEHAVIOR OF RUBBER ELASTIC-MATERIALS
    ARRUDA, EM
    BOYCE, MC
    [J]. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1993, 41 (02) : 389 - 412
  • [5] Identification of a Thermo-elasto-viscoplastic Behavior Law for the Simulation of Thermoforming of High Impact Polystyrene
    Atmani, O.
    Abbes, B.
    Abbes, F.
    Li, Y. M.
    Batkam, S.
    [J]. PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018), 2018, 1960
  • [6] Numerical simulation of plug-assisted thermoforming: application to polystyrene
    Bernard, C. A.
    Correia, J. P. M.
    Bahlouli, N.
    Ahzi, S.
    [J]. CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 1602 - 1610
  • [7] A STUDY OF STRESS RELAXATION WITH FINITE STRAIN
    BERNSTEIN, B
    KEARSLEY, EA
    ZAPAS, LJ
    [J]. TRANSACTIONS OF THE SOCIETY OF RHEOLOGY, 1963, 7 : 391 - 410
  • [8] RUBBER-LIKE TENSILE BEHAVIOR OF YIELDED HIGH-IMPACT POLYSTYRENE
    CASTELLANI, L
    MAESTRINI, C
    [J]. POLYMER, 1990, 31 (12) : 2278 - 2286
  • [9] Effects of material properties and contact conditions in modelling of plug assisted thermoforming
    Collins, P
    Lappin, JF
    Harkin-Jones, EMA
    Martin, PJ
    [J]. PLASTICS RUBBER AND COMPOSITES, 2000, 29 (07) : 349 - 359
  • [10] A fast and elitist multiobjective genetic algorithm: NSGA-II
    Deb, K
    Pratap, A
    Agarwal, S
    Meyarivan, T
    [J]. IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION, 2002, 6 (02) : 182 - 197
12345