Evaluation of RBD palm stearin as alternative lubricant for cold forward extrusion process

被引：4
|
作者：
Farhanah, A. N. [1 ]
Syahrullail, S. [1 ]
Ajruddin, M. A. [1 ]
机构：
[1] Univ Teknol Malaysia, Fac Mech Engn, Utm Skudai 81310, Johor, Malaysia
来源：
INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING (ICADME 2017) | 2017年 / 908卷
关键词：
OIL; FRICTION; PERFORMANCE;
D O I：
10.1088/1742-6596/908/1/012062
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A rapid growth in awareness level over environmental problems have brought researchers to find a substitute lubricant to reduce the use of mineral based lubricants. In this paper, the lubrication performance of RBD palm stearin was evaluated in order to be utilized as alternative lubricant for metal forming lubricant. Commercial paraffinic mineral oil VG460 and VG95 were used for comparison purposes. The experiment was conducted using cold work extrusion apparatus that consists of taper die (made of tool steel SKD11) and a pair of billet (made of pure aluminium A1100). The results obtained from these experiments showed that RBD palm stearin can reduce extrusion load, produce a lower surface roughness value and have smooth surface profile compared to commercial paraffinic mineral oils. It is demonstrated that RBD palm stearin have promising lubrication performance and can be considered as alternative lubricant in metal forming process.
引用
收藏
页数：7
相关论文
共 40 条
  • [1] Experimental evaluation of palm oil as lubricant in cold forward extrusion process
    Syahrullail, S.
    Zubil, B. M.
    Azwadi, C. S. N.
    Ridzuan, M. J. M.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2011, 53 (07) : 549 - 555
  • [2] Improvement of the Lubrication Performance of RBD Palm Stearin as an Alternative Lubricant under Different Sliding Speeds
    Azman, Nurul Farhanah
    Samion, Syahrullail
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2017, 63 (01): : 15 - 24
  • [3] A new approach to cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant
    Nurul, M. A.
    Syahrullail, S.
    SCIENTIA IRANICA, 2017, 24 (06) : 2875 - 2886
  • [4] Experimental Evaluation of Refined, Bleached, and Deodorized Palm Olein and Palm Stearin in Cold Extrusion of Aluminum A1050
    Syahrullail, S.
    Kamitani, S.
    Nakanishi, K.
    TRIBOLOGY TRANSACTIONS, 2012, 55 (02) : 199 - 209
  • [5] The Effect of Lubricant Viscosity in Cold Work Forward Extrusion
    Syahrullail, S.
    Kamitani, S.
    Nakanishi, K.
    MECHANICAL AND MATERIALS ENGINEERING, 2014, 554 : 291 - +
  • [6] Evaluation of Paraffinic Mineral Oil as Lubricant in Cold Work Extrusion Process
    Syahrullail, S.
    Nurul, M. A.
    Mechanical and Materials Engineering, 2014, 554 : 327 - 331
  • [7] Tribological evaluation of modified RBD palm olein-based lubricant on orthogonal cutting process
    Talib, N.
    Amiril, S. A. S.
    Razak, A. S. A.
    Rahim, E. A.
    Ghani, S. A. Che
    Syahrullail, S.
    PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018 (ASIATRIB 2018), 2018, : 200 - 201
  • [8] A Study of Minimum Quantity Lubricant of Refined Bleached Deodorized Palm Stearin in Plane Strain Extrusion
    Ridzuan, M. J. M.
    Hafis, S. M.
    Saifullah, K. N.
    Syahrullail, S.
    4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), PT 1 AND 2, 2012, 1440 : 900 - 904
  • [9] Effect of Extrusion Ratio on Paraffinic Mineral Oil Lubricant in Cold Forward Extrusion
    Hafis, S. M.
    Ridzuan, M. J. M.
    Helmi, W. N. Imaduddin
    Syahrullail, S.
    4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), PT 1 AND 2, 2012, 1440 : 556 - 561
  • [10] The Effect of Paraffinic Mineral Oil Lubricant in Cold Forward Extrusion
    Hafis, S. M.
    Ridzuan, M. J. M.
    Syahrullail, S.
    Amran, A.
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2011, 3 (01): : 28 - 31
1234