Effects of polyhedral oligomeric silsesquioxane coatings on the interface and impact properties of carbon-fiber/polyarylacetylene composites

被引：12
作者：
Zhang, Xuezhong [1 ]
Huang, Yudong [1 ]
Wang, Tianyu [1 ]
Liu, Li [1 ]
机构：
[1] Harbin Inst Technol, Dept Appl Chem, Harbin 150001, Peoples R China
来源：
JOURNAL OF APPLIED POLYMER SCIENCE | 2006年 / 102卷 / 06期
关键词：
adhesion; coatings; composites; impact resistant; interfaces;
D O I：
10.1002/app.24752
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
Two kinds of polyhedral oligomeric silsesquioxane (POSS) coatings were used for the modification of the interface in carbon fiber (CF) reinforced polyarylacetylene (PAA) matrix composites. The effects of the organic-inorganic hybrid POSS coatings on the properties of the composites were studied with short-beam-bending, microde-bonding, and impact tests. The interlaminar shear strength and interfacial shear strength showed that the POSS coatings resulted in an interfacial property improvement for the CF/PAA composites in comparison with the untreated ones. The impact-test results implied that the impact properties of the POSS-coating-treated composites were improved. The stiffness of the interface created by the POSS coatings was larger than that of the fiber and matrix in the CF/PAA composites according to the force-modulation-mode atomic force microscopy test results. The rigid POSS interlayer in the composites enhanced the interfacial mechanical properties with a simultaneous improvement of the impact properties; this was an interesting phenomenon in the composite-interface modification. (c) 2006 Wiley Periodicals, Inc.
引用
收藏
页码：5202 / 5211
页数：10
相关论文
共 50 条
[41]   Multiscale analysis of the mechanical properties and interface damage mechanisms of carbon fiber reinforced polypropylene composites [J].
Qiu, Tian ;
Yang, Zhaoran ;
Liang, Lihong .
POLYMER COMPOSITES, 2025, 46 (09) :8307-8317
[42]   Effects of sol proportion on mechanical properties of carbon fiber reinforced carbon aerogel insulation composites [J].
Yang X. ;
Feng J. ;
Jiang Y. ;
Zhang Z. ;
Feng J. .
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2016, 33 (06) :1251-1258
[43]   The effects of plasma surface treatment on the mechanical properties of polycarbonate/carbon nanotube/carbon fiber composites [J].
Cho, Beom-Gon ;
Hwang, Sang-Ha ;
Park, Miseon ;
Park, Jong Kyoo ;
Park, Young-Bin ;
Chae, Han Gi .
COMPOSITES PART B-ENGINEERING, 2019, 160 :436-445
[44]   Effects of initial fiber length and fiber length distribution on the properties of carbon-fiber-reinforced-polypropylene composites [J].
Karsli, Nevin Gamze ;
Aytac, Ayse ;
Deniz, Veli .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2012, 31 (15) :1053-1060
[45]   Crosslinked Low-Density Polyethylene/Polyhedral Oligomeric Silsesquioxanes Composites: Effects of Crosslinker Concentration on the Mechanical, Thermal, Rheological, and Shape Memory Properties [J].
Bicer, Ezgi ;
Demir, Gulsen Kurt ;
Kodal, Mehmet ;
Ozkoc, Guralp .
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2021, 60 (12) :999-1024
[46]   Tensile, bending, and impact properties of laminated carbon/aramid/glass hybrid fiber composites [J].
Eksi, Secil ;
Danyildiz, Fatih Emir ;
Ozsoy, Neslihan ;
Ozsoy, Murat .
MATERIALS TESTING, 2023, 65 (12) :1826-1835
[47]   Impact of graphene oxide lateral sizes on the mechanical and thermal properties of carbon fiber composites [J].
Ma, Jiajun ;
Dai, Shengtao ;
Guo, Zongwei ;
Shang, Lei ;
Ao, Yuhui ;
Jin, Lin .
POLYMER COMPOSITES, 2025, 46 (03) :2061-2072
[48]   Effects of A, B, and S components on fiber length distribution, mechanical, and impact properties of carbon fiber/ABS composites produced by different processing methods [J].
Lee, Heesook ;
Cho, Donghwan .
JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (28)
[49]   Influence of the interface structure on the thermo-mechanical properties of Cu-X (X = Cr or B)/carbon fiber composites [J].
Veillere, A. ;
Heintz, J. -M. ;
Chandra, N. ;
Douin, J. ;
Lahaye, M. ;
Lalet, G. ;
Vincent, C. ;
Silvain, J. -F. .
MATERIALS RESEARCH BULLETIN, 2012, 47 (02) :375-380
[50]   Poly(glycidyl Methacrylate) Grafted to Carbon Fiber Surface by RAFT Polymerization for Enhancing Interface Adhesion and Mechanical Properties of Carbon Fiber/Epoxy Composites [J].
Lan, Daosong ;
Xiong, Lei ;
Wanyan, Hongtao ;
Yuan, Yiming ;
Fan, Qian ;
Zeng, Xuekai ;
Chen, Yonglong ;
Cao, Zhiyuan .
POLYMERS & POLYMER COMPOSITES, 2017, 25 (01) :113-118
12345