Shear Strength of Unstiffened Steel I-Section Members

被引:16
|
作者
Daley, Aaron J. [1 ]
Davis, D. Brad [2 ]
White, Donald W. [3 ]
机构
[1] Brown & Kubican Struct Engineers, 2224 Young Dr, Lexington, KY 40505 USA
[2] Univ Kentucky, Dept Civil Engn, 373 Raymond Bldg, Lexington, KY 40506 USA
[3] Georgia Inst Technol, Sch Civil & Environm Engn, 790 Atlantic Dr, Atlanta, GA 30332 USA
关键词
Steel; Members; Shear; Stability; Plates; Metal and composite structures; WEB PANELS; RESISTANCE; GIRDERS;
D O I
10.1061/(ASCE)ST.1943-541X.0001639
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Ultimate shear strengths of 20 unstiffened I-girder specimens from the literature and seven new specimens designed to fill gaps in the experimental data are compared with predictions from models recommended by Basler, Hoglund, and Lee and colleagues. Basler's model, which is based solely on an idealized web shear buckling resistance, is shown to be accurate for webs with slenderness between 60 and 100. However, it is very conservative for members with typical plate girder web slenderness ratios. Hoglund's methods, which aim to characterize the shear postbuckling capacity of unstiffened webs, are found to be accurate to conservative. The method by Lee and colleagues, which aims to predict the shear postbuckling strength of webs with widely spaced stiffeners, is accurate on average. However, this method significantly overpredicts the strength of several specimens. A proposed adaptation of Hoglund's recommendations from a 1997 article matches the current AISC shear buckling strength equations for stocky web panels, is very simple to apply, and provides predictions that are in between those of Hoglund's methods. This adaptation of Hoglund's equations gives shear resistances that are as high as 3.66times the capacity from Basler's model. The specific characteristics of the different shear resistance equations are discussed, and recommendations for potential further improvement are offered. The interaction between the shear and moment capacities is found to be insignificant, although many of the specimens are subjected simultaneously to shears and moments close to the calculated nominal strengths. Resistance factors are computed to facilitate potential inclusion in modern specifications. (C) 2016 American Society of Civil Engineers.
引用
收藏
页数:11
相关论文
共 50 条
  • [41] Postbuckling resistance of high strength steel welded I-section beams based on interactive slenderness
    Xu, Kelong
    Shi, Yongjiu
    THIN-WALLED STRUCTURES, 2021, 159
  • [42] Unified flexural resistance equations for stability design of steel i-section members: Uniform bending tests
    White, Donald W.
    Jung, Se-Kwon
    JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 2008, 134 (09): : 1450 - 1470
  • [43] Global stability of mono-symmetric I-section high-strength steel beams
    Zhao, Jinyou
    Li, Jin
    McDermott, Paddy
    Wang, Jie
    Chen, Xi
    Sun, Yao
    STRUCTURES, 2024, 68
  • [44] Flexural strength and rotation capacity of welded I-section steel beams with longitudinally profiled flanges
    Liu, Xiaoling
    Wang, Yuanqing
    Ban, Huiyong
    Liu, Ming
    Veljkovic, Milan
    Bijlaard, Frans S. K.
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2020, 173
  • [45] Ultimate strength interaction of unstiffened steel box members subjected to bending and torsion
    Kim, K.
    BRIDGE MAINTENANCE, SAFETY, MANAGEMENT, RESILIENCE AND SUSTAINABILITY, 2012, : 3294 - 3301
  • [46] Buckling of stainless steel welded I-section columns
    Tuezney, Stijn
    Lauwens, Kathleen
    Afshan, Sheida
    Rossi, Barbara
    ENGINEERING STRUCTURES, 2021, 236
  • [47] Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams
    Shi, Yongjiu
    Xu, Kelong
    INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2019, 19 (04) : 1171 - 1190
  • [48] Behaviour and design of stainless steel I-section columns in fire
    Kucukler, Merih
    Xing, Zhe
    Gardner, Leroy
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2020, 165 (165)
  • [49] Timoshenko line-element for stability analysis of tapered I-section steel members considering warping effects
    Abdelrahman, A. H. A.
    Chen, Liang
    Liu, Si-Wei
    Ziemian, Ronald D.
    THIN-WALLED STRUCTURES, 2022, 175
  • [50] Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams
    Yongjiu Shi
    Kelong Xu
    International Journal of Steel Structures, 2019, 19 : 1171 - 1190