Classification of Multiple Partial Discharge Sources in Dielectric Insulation Material using Cepstrum Analysis-Artificial Neural Network

In high-voltage equipment insulation, multiple partial discharge (PD) sources may exist at the same time. Therefore, it is important to identify PDs from different PD sources under noisy condition in insulations, with the highest accuracy. Although many studies on classifying different PD types in insulation have been performed, some signal processing methods have not been used in the past for this application. Thus, in this work, Cepstrum analysis on PD signals combined with artificial neural network (ANN) is proposed to classify the PD types from different PD sources simultaneously under noisy condition. Measurement data from different sources of artificial PD signals were recorded from insulation materials. Feature extractions were performed on the recorded signals, including Cepstrum analysis, discrete wavelet transform, discrete Fourier transform, and wavelet packet transform for comparison between the different methods. The features extracted were used to train the ANN. To investigate the classification accuracy under noisy signals, the remaining data were corrupted with artificial noise. The noisy data were classified using the ANN, which had been trained by noise-free PD signals. It is found that Cepstrum-ANN yields the highest classification accuracy for noisy PD signals than the other methods tested. (c) 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.