Direct Forming of All-Polypropylene Composites Products from Fabrics made of Co-Extruded Tapes

Many technologies presented in literature for the forming of self-reinforced or all-polymer composites are based on manufacturing processes involving thermoforming of pre-consolidated sheets. This paper describes novel direct forming routes to manufacture simple geometries of self-reinforced, all-polypropylene (all-PP) composites, by moulding fabrics of woven co-extruded polypropylene tapes directly into composite products, without the need for pre-consolidated sheet. High strength co-extruded PP tapes have potential processing advantages over mono-extruded fibres or tapes as they allow for a larger temperature processing window for consolidation. This enlarged temperature processing window makes direct forming routes feasible, without the need for an intermediate pre-consolidated sheet product. Thermoforming studies show that direct forming is an interesting alternative to stamping of pre-consolidated sheets, as it eliminates an expensive belt-pressing step which is normally needed for the manufacturing of semi-finished sheets products. Moreover, results from forming studies shows that only half the energy was required to directly form a simple dome geometry from a stack of fabrics compared to stamping the same shape from a pre-consolidated sheet.