Unraveling the origin of strain-induced precipitation of M23C6 in the plastically deformed 347 Austenite stainless steel

被引：31

作者：

Hong, Sung-Min ^{[1
,2
]}

Kim, Myung-Yeun ^{[1
,2
]}

Min, Dong-Joon ^{[2
]}

Lee, Kyu-ho ^{[1
]}

Shim, Jae-Hyeok ^{[1
]}

Kim, Dong-Ik ^{[1
]}

Suh, Jin-Yoo ^{[1
]}

Jung, Woo-Sang ^{[1
]}

Choi, In-Suk ^{[1
]}

机构：

[1] Korea Inst Sci & Technol, High Temp Energy Mat Res Ctr, Seoul 136791, South Korea

[2] Yonsei Univ, Dept Mat Sci & Engn, Seoul 120749, South Korea

来源：

MATERIALS CHARACTERIZATION | 2014年 / 94卷

关键词：

347 austenite stainless steel; Strain-induced precipitation; Deformation band; a ' Martensite; M23C5; precipitates; INDUCED MARTENSITE; DEFORMATION; SENSITIZATION; MORPHOLOGIES; MECHANISM; FAILURE; TUBES;

D O I：

10.1016/j.matchar.2014.04.002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this research, the phenomenon of strain-induced precipitation of M-23 (M = Cr, Fe, Mo) C-6 precipitates in 347 austenite stainless steel was systematically studied. During annealing at 650 degrees C, the experimental results exhibited significantly earlier formation of M23C6 precipitates in the plastically strained specimen, than in the no-strain specimen. The various microstructural characterizations showed that the accelerated formation of M23C6 precipitates occurred around deformation bands that were generated by deformation twinning. Extensive investigation suggested that the strain-induced precipitation of M23C6 is attributed to the formation of strain-induced alpha' martensite during plastic deformation near deformation bands. (C) 2014 Elsevier Inc. rights reserved.

引用

页码：7 / 13

页数：7

共 21 条

[11] LECROISEY F, 1972, METALL TRANS, V3, P387
[12] The morphologies and characteristics of impact-induced martensite in 304L stainless steel
Lee, WS
Lin, CF
[J]. SCRIPTA MATERIALIA, 2000, 43 (08) : 777 - 782
[13] History of power plants and progress in heat resistant steels
Masuyama, F
[J]. ISIJ INTERNATIONAL, 2001, 41 (06) : 612 - 625
[14] Deformation Microstructure and Texture in a Cold-Rolled Austenitic Steel with Low Stacking-Fault Energy
Morikawa, Tatsuya
Higashida, Kenji
[J]. MATERIALS TRANSACTIONS, 2010, 51 (04) : 620 - 624
[15] Annealing of cold-worked austenitic stainless steels
Padilha, AF
Plaut, RL
Rios, PR
[J]. ISIJ INTERNATIONAL, 2003, 43 (02) : 135 - 143
[16] Decomposition of austenite in austenitic stainless steels
Padilha, AF
Rios, PR
[J]. ISIJ INTERNATIONAL, 2002, 42 (04) : 325 - 337
[17] STACKING-FAULT ENERGIES OF 7 COMMERCIAL AUSTENITIC STAINLESS-STEELS
SCHRAMM, RE
REED, RP
[J]. METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1975, 6 (07): : 1345 - 1351
[18] Twinning and martensite in a 304 austenitic stainless steel
Shen, Y. F.
Li, X. X.
Sun, X.
Wang, Y. D.
Zuo, L.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 : 514 - 522
[19] Evaluation of the dislocation density and dislocation character in cold rolled Type 304 steel determined by profile analysis of X-ray diffraction
Shintani, Takashi
Murata, Yoshinori
[J]. ACTA MATERIALIA, 2011, 59 (11) : 4314 - 4322
[20] Sensitization induced stress corrosion failure of AISI 347 stainless steel fractionator furnace tubes
Swaminathan, J.
Singh, Raghuvir
Gunjan, Manoj Kumar
Mahato, Bhupeshwar
[J]. ENGINEERING FAILURE ANALYSIS, 2011, 18 (08) : 2211 - 2221

← 1 2 3 →