Effect of annealing on electrical, structural, and optical properties of sol-gel ITO thin films

被引:36
作者
Hammad, Talaat Moussa [1 ]
机构
[1] Brigham Young Univ, Dept Chem & Biochem, Provo, UT 84602 USA
来源
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE | 2009年 / 206卷 / 09期
关键词
INDIUM-TIN-OXIDE; SPUTTERED ITO; TRANSPARENT; PERFORMANCES;
D O I
10.1002/pssa.200881781
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Indium tin oxide (ITO) thin films (In/Sn = 90: 10) prepared by the sol-gel dip-coating process on glass substrates, followed by annealing in air in the temperature range 150-550 degrees C were studied. Overall the films structure, surface roughness, and electrical performances are improved, leading to electrical resistivity fifth order of magnitude larger than before annealing and a more compact and crystalline films, translated by a preferential orientation in the (I I I) direction. Besides that, the films are highly transparent in the visible range, where it shows an average transmittance of 92.3% after annealing to 550 degrees C. The allowed direct band gap at temperature range 150-550 degrees C was estimated to be 3.32-4.21 eV, increasing as the annealing temperature also increases. (C) 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
引用
收藏
页码:2128 / 2132
页数:5
相关论文
共 27 条
  • [1] Investigation of annealing effects on sol-gel deposited indium tin oxide thin films in different atmospheres
    Alam, MJ
    Cameron, DC
    [J]. THIN SOLID FILMS, 2002, 420 : 76 - 82
  • [2] Influence of the process parameters on structural and electrical properties of r.f. magnetron sputtering ITO films
    Baía, I
    Fernandes, B
    Nunes, P
    Quintela, M
    Martins, R
    [J]. THIN SOLID FILMS, 2001, 383 (1-2) : 244 - 247
  • [3] Performances exhibited by large area ITO layers produced by rf magnetron sputtering
    Baía, I
    Quintela, M
    Mendes, L
    Nunes, P
    Martins, R
    [J]. THIN SOLID FILMS, 1999, 337 (1-2) : 171 - 175
  • [4] PRECISE MEASUREMENTS OF OXYGEN-CONTENT - OXYGEN VACANCIES IN TRANSPARENT CONDUCTING INDIUM OXIDE-FILMS
    BELLINGHAM, JR
    MACKENZIE, AP
    PHILLIPS, WA
    [J]. APPLIED PHYSICS LETTERS, 1991, 58 (22) : 2506 - 2508
  • [5] Comparison of spray pyrolyzed FTO, ATO and ITO coatings for flat and bent glass substrates
    Bisht, H
    Eun, HT
    Mehrtens, A
    Aegerter, MA
    [J]. THIN SOLID FILMS, 1999, 351 (1-2) : 109 - 114
  • [6] Role of annealing environment on the performances of large area ITO films produced by rf magnetron sputtering
    Canhola, P
    Martins, N
    Raniero, L
    Pereira, S
    Fortunato, E
    Ferreira, I
    Martins, R
    [J]. THIN SOLID FILMS, 2005, 487 (1-2) : 271 - 276
  • [7] TRANSPARENT CONDUCTORS - A STATUS REVIEW
    CHOPRA, KL
    MAJOR, S
    PANDYA, DK
    [J]. THIN SOLID FILMS, 1983, 102 (01) : 1 - 46
  • [8] Influence of pressure and annealing on the microstructural and electro-optical properties of RF magnetron sputtered ITO thin films
    Cruz, LR
    Legnani, C
    Matoso, IG
    Ferreira, CL
    Moutinho, HR
    [J]. MATERIALS RESEARCH BULLETIN, 2004, 39 (7-8) : 993 - 1003
  • [9] Physical properties of sputtered ITO and WO3 thin films
    Cui, HN
    Teixeira, V
    Monteiro, A
    Fortunato, E
    Martins, R
    Bertran, E
    [J]. ADVANCED MATERIALS FORUM II, 2004, 455-456 : 7 - 11
  • [10] The effect of annealing on structural, electrical and optical properties of nanostructured ITO films prepared by e-beam evaporation
    Fallah, Hamid Reza
    Ghasemi, Mohsen
    Hassanzadeh, Ali
    Steki, Hadi
    [J]. MATERIALS RESEARCH BULLETIN, 2007, 42 (03) : 487 - 496