Creep rupture properties of type 316LN stainless steel welded by the SAW process

被引：4

作者：

Kim, Woo Gon ^{[1
]}

Ryu, Woo Seog ^{[1
]}

机构：

[1] Korea Atom Energy Res Inst, 150 Deogjin Dong, Taejon 305353, South Korea

来源：

NANOCOMPOSITES AND NANOPOROUS MATERIALS | 2007年 / 119卷

关键词：

creep; creep rupture; submerged arc.weld (SAW); type 316LN stainless steel; steady state creep rate; weld metal;

D O I：

10.4028/www.scientific.net/SSP.119.91

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The creep properties of type 316LN SS welded by the SAW process have been evaluated. The creep tests for both the base and weld metals were conducted with different stress levels at 550 degrees C and 600 degrees C. The creep-rupture time of the weld metal did not show a large difference when compared to that of the base one, though it exhibited a little lower value at 600 degrees C. The creep rate of the weld metal was lower than that of the base one at the same stress and rupture-time conditions. Especially, the creep-rupture ductility of the weld metal is found to be decreased by about 60%, compared to the base one. This is due to the decreasing of tensile elongation and the increasing of the yield stress in the weld metals.

引用

页码：91 / +

页数：2

共 50 条

[41] Effect of Nitrogen on Evolution of Dislocation Substructure in 316LN SS during Creep [J].

Ganesan, V. ;

Mathew, M. D. ;

Parameswaran, P. ;

Laha, K. .

6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION, 2013, 55 :36-40

[42] Stress Corrosion Cracking of Nitrogen-containing Stainless Steel 316LN in High Temperature Water Environments [J].

Yang Wu ;

Li Guangfu ;

Huang Chunbo ;

Zhou Jianjiang ;

Lue Zhanpeng .

CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2010, 23 (06) :677-683

[43] Microcrack initiation mechanisms of 316LN austenitic stainless steel under in-phase thermomechanical fatigue loading [J].

Li, Bingbing ;

Zheng, Yiming ;

Shi, Shouwen ;

Liu, Yanming ;

Li, Yajing ;

Chen, Xu .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 752 :1-14

[44] Creep and Creep-fatigue Behaviour of 316 Stainless Steel [J].

Holmstrom, Stefan ;

Pohja, Rami ;

Nurmela, Asta ;

Moilanen, Pekka ;

Auerkari, Pertti .

6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION, 2013, 55 :160-164

[45] Effect of Nitrogen Content on the Tensile and Stress Corrosion Cracking Behavior of AISI Type 316LN Stainless Steels [J].

Poonguzhali, A. ;

Anita, T. ;

Sivaibharasi, N. ;

Shaikh, H. ;

Dayal, R. K. .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2014, 67 (02) :177-184

[46] Revised creep fracture maps of Type 316 stainless steel and their mechanistic perspective [J].

Petkov, Markian ;

Juan, Pierre-Alexandre .

ENGINEERING FAILURE ANALYSIS, 2024, 159

[47] CREEP PROPERTY OF TYPE 316Cb STAINLESS STEEL HEATER TUBE [J].

Hau, Jorge ;

Hsieh, Bing ;

Park, Neil .

PROCEEDINGS OF ASME 2023 PRESSURE VESSELS & PIPING CONFERENCE, PVP2023, VOL 5, 2023,

[48] EFFECT OF PLASTICITY ON CREEP DEFORMATION IN TYPE 316H STAINLESS STEEL [J].

Al Mamun, Abdullah ;

Simpson, Chris ;

Erinosho, Tomiwa ;

Agius, Dylan ;

Reinhard, Christina ;

Mostafavi, Mahmoud ;

Knowles, David .

PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 6A, 2019,

[49] Effect of nitrogen on tensile flow behaviour of type 316 LN austenitic stainless steel [J].

Ganesan, V. ;

Laha, K. ;

Parameswaran, P. ;

Nandagopal, M. ;

Mathew, M. D. .

MATERIALS AT HIGH TEMPERATURES, 2015, 32 (04) :438-445

[50] Evaluation of variation of tensile strength across 316LN stainless steel weld joint using automated ball indentation technique [J].

Kumar, J. Ganesh ;

Vijayanand, V. D. ;

Nandagopal, M. ;

Laha, K. .

MATERIALS AT HIGH TEMPERATURES, 2015, 32 (06) :619-626

← 1 2 3 4 5 →