Creep rupture properties of type 316LN stainless steel welded by the SAW process

被引：4

作者：

Kim, Woo Gon ^{[1
]}

Ryu, Woo Seog ^{[1
]}

机构：

[1] Korea Atom Energy Res Inst, 150 Deogjin Dong, Taejon 305353, South Korea

来源：

NANOCOMPOSITES AND NANOPOROUS MATERIALS | 2007年 / 119卷

关键词：

creep; creep rupture; submerged arc.weld (SAW); type 316LN stainless steel; steady state creep rate; weld metal;

D O I：

10.4028/www.scientific.net/SSP.119.91

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The creep properties of type 316LN SS welded by the SAW process have been evaluated. The creep tests for both the base and weld metals were conducted with different stress levels at 550 degrees C and 600 degrees C. The creep-rupture time of the weld metal did not show a large difference when compared to that of the base one, though it exhibited a little lower value at 600 degrees C. The creep rate of the weld metal was lower than that of the base one at the same stress and rupture-time conditions. Especially, the creep-rupture ductility of the weld metal is found to be decreased by about 60%, compared to the base one. This is due to the decreasing of tensile elongation and the increasing of the yield stress in the weld metals.

引用

页码：91 / +

页数：2

共 50 条

[31] Evolution of damage under combined low and high cycle fatigue loading in a type 316LN stainless steel at different temperatures [J].

Sarkar, Aritra ;

Nagesha, A. ;

Parameswaran, P. ;

Sandhya, R. ;

Laha, K. ;

Okazaki, M. .

INTERNATIONAL JOURNAL OF FATIGUE, 2017, 103 :28-38

[32] Assessment of Creep Strain Distribution Across Base Metal of 316LN Austenitic Stainless Steel Weld Joint by an EBSD-Based Parameter [J].

V. D. Vijayanand ;

V. Ganesan ;

J. Ganesh Kumar ;

P. Parameswaran ;

K. Naveena .

Metallurgical and Materials Transactions A, 2015, 46 :5456-5466

[33] Influence of Thermal Aging on Tensile and Low Cycle Fatigue Behavior of Type 316LN Austenitic Stainless Steel Weld Joint [J].

Kumar, T. Suresh ;

Nagesha, A. ;

Kumar, J. Ganesh ;

Parameswaran, P. ;

Sandhya, R. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (08) :3257-3273

[34] Ratcheting-induced twinning/de-twinning behaviors in a 316LN austenitic stainless steel [J].

Yang, Wen-hao ;

Cheng, Peng-ming ;

Li, Yang ;

Wang, Ruihong ;

Liu, Gang ;

Xin, Lu ;

Zhang, Jin-yu ;

Sun, Jun .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 851

[35] Effect of Beam Oscillation on Creep Properties of Electron Beam Welded AISI 316L Stainless Steel [J].

Kar, Jyotirmaya ;

Guguloth, Krishna .

METALS AND MATERIALS INTERNATIONAL, 2022, 28 (02) :503-513

[36] Effect of Beam Oscillation on Creep Properties of Electron Beam Welded AISI 316L Stainless Steel [J].

Jyotirmaya Kar ;

Krishna Guguloth .

Metals and Materials International, 2022, 28 :503-513

[37] Evaluation of Monkman-Grant parameters for type 316LN and modified 9Cr-Mo stainless steels [J].

Woo Gon Kim ;

Sung Ho Kim ;

Woo Seog Ryu .

KSME International Journal, 2002, 16 :1420-1427

[38] Evaluation of Monkman-Grant parameters for type 316LN and modified 9Cr-Mo stainless steels [J].

Kim, WG ;

Kim, SH ;

Ryu, WS .

KSME INTERNATIONAL JOURNAL, 2002, 16 (11) :1420-1427

[39] Application and standard error analysis of the parametric methods for predicting the creep life of type 316LN SS [J].

Kim, WG ;

Yoon, SN ;

Ryu, WS .

ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4, 2005, 297-300 :2272-2277

[40] Dislocation substructure and precipitation in type 316 stainless steel deformed in creep [J].

Mathew, MD ;

Sundararaman, M ;

Mannan, SL .

MATERIALS TRANSACTIONS JIM, 1997, 38 (01) :37-42

← 1 2 3 4 5 →