Creep rupture properties of type 316LN stainless steel welded by the SAW process

被引：4
作者：
Kim, Woo Gon [1 ]
Ryu, Woo Seog [1 ]
机构：
[1] Korea Atom Energy Res Inst, 150 Deogjin Dong, Taejon 305353, South Korea
来源：
NANOCOMPOSITES AND NANOPOROUS MATERIALS | 2007年 / 119卷
关键词：
creep; creep rupture; submerged arc.weld (SAW); type 316LN stainless steel; steady state creep rate; weld metal;
D O I：
10.4028/www.scientific.net/SSP.119.91
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The creep properties of type 316LN SS welded by the SAW process have been evaluated. The creep tests for both the base and weld metals were conducted with different stress levels at 550 degrees C and 600 degrees C. The creep-rupture time of the weld metal did not show a large difference when compared to that of the base one, though it exhibited a little lower value at 600 degrees C. The creep rate of the weld metal was lower than that of the base one at the same stress and rupture-time conditions. Especially, the creep-rupture ductility of the weld metal is found to be decreased by about 60%, compared to the base one. This is due to the decreasing of tensile elongation and the increasing of the yield stress in the weld metals.
引用
收藏
页码：91 / +
页数：2
相关论文
共 50 条
  • [21] Effect of metallurgical variables on the stress corrosion crack growth behaviour of AISI type 316LN stainless steel
    Shaikh, H.
    Anita, T.
    Dayal, R. K.
    Khatak, H. S.
    CORROSION SCIENCE, 2010, 52 (04) : 1146 - 1154
  • [22] Influence of varying nitrogen on creep deformation behaviour of 316LN austenitic stainless steel in the framework of the state-variable approach
    Praveen, C.
    Christopher, J.
    Ganesan, V.
    Reddy, G. V. Prasad
    Albert, Shaju K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 803
  • [23] Thermomechanical and Isothermal Fatigue Behavior of 316LN Stainless Steel with Varying Nitrogen Content
    Reddy, G. V. Prasad
    Nagesha, A.
    Sandhya, R.
    Sankaran, S.
    Mathew, M. D.
    Rao, K. Bhanu Sankara
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (02): : 695 - 707
  • [24] Nitrogen Enhanced 316LN Austenitic Stainless Steel for Sodium Cooled Fast Reactors
    Jayakumar, T.
    Bhaduri, A. K.
    Mathew, M. D.
    Albert, S. K.
    Mudali, U. Kamachi
    CENTURY OF STAINLESS STEELS, 2013, 794 : 670 - 680
  • [25] Low cycle fatigue characteristics and life prediction of 316LN austenitic stainless steel
    Ding, Kailun
    Tang, Zhengxin
    He, Xikou
    Wang, Xitao
    He, Jinshan
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2024, 34 (06) : 1194 - 1206
  • [26] Influence of Nitrogen Content on the Evolution of Creep Damage in 316 LN Stainless Steel
    Ganesan, V.
    Laha, K.
    Mathew, M. D.
    STRUCTURAL INTEGRITY, 2014, 86 : 58 - 65
  • [27] The effect of nitrogen content on creep rupture strength of low carbon type 316 austenitic stainless steel
    Uchida, H
    Fujiwara, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1996, 82 (06): : 514 - 519
  • [28] Effects of carbon content and chromium segregation on creep rupture properties of low carbon and medium nitrogen type 316 stainless steel
    Nakazawa, T
    Fujita, N
    Kimura, H
    Komatsu, H
    Kotoh, H
    Kaguchi, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1997, 83 (05): : 317 - 322
  • [29] Effect of hydrogen on nanoindentation creep of type 316 stainless steel
    Gao, X
    Qiao, LJ
    Su, YJ
    Chu, WY
    ACTA METALLURGICA SINICA, 2005, 41 (04) : 342 - 346
  • [30] Influence of long term Sodium Exposure on the Corrosion and Tensile Properties of AISI Type 316LN stainless steel and modified 9Cr-1Mo steel
    SivaiBharasi, N.
    Krishna, Nanda Gopala
    Shankar, A. Ravi
    Krishnakumar, S.
    Chandramouli, S.
    Karki, Vijay
    Kannan, S.
    Philip, John
    JOURNAL OF NUCLEAR MATERIALS, 2022, 567
12345