共 40 条
A proposal for the maximum use of recycled concrete sand in masonry mortar design
被引:44
作者:
Fernandez-Ledesma, E.
[1
]
Jimenez, J. R.
[1
]
Ayuso, J.
[1
]
Corinaldesi, V.
[2
]
Iglesias-Godino, F. J.
[3
]
机构:
[1] Univ Cordoba, Construct Engn Area, Cordoba, Spain
[2] Univ Politecn Marche, Dept Mat & Environm Engn & Phys, Ancona, Italy
[3] Univ Jaen, Dept Chem Environm & Mat Engn, Jaen, Spain
关键词:
Mortar;
Compressive Strength;
Mechanical Properties;
Retraction;
Waste Treatment;
DEMOLITION WASTE;
COMPRESSIVE STRENGTH;
AGGREGATE;
CONSTRUCTION;
PERFORMANCE;
CDW;
BEHAVIOR;
ENERGY;
D O I:
10.3989/mc.2016.08414
中图分类号:
TU [建筑科学];
学科分类号:
0813 ;
摘要:
Natural sand mining from rivers and seashores is causing serious environmental problems in many parts of the world, whereas the fine fraction from recycling concrete waste is underutilized as a construction material. The aim of this paper is to determine the maximum replacement level of natural sand by recycled sand in the manufacturing of masonry mortar (M-10). For this purpose, five replacement levels were tested: 0%, 25%, 50%, 75% and 100% by volume. The mixes were made using cement CEM II/BL 32.5 N in a volumetric proportion of cement-to-aggregate of 1:5. A commercial admixture was used at a constant content. The amount of water was variable to achieve a consistency of 175 +/- 10 mm. The short-and long-term mortar properties were evaluated. The data were analyzed using a one-way ANOVA. In conclusion, a maximum percentage of 50% recycled concrete sand can be used in an indoor environment.
引用
收藏
页数:15
相关论文