A study on the cutting characteristics of glass fiber reinforced plastics with respect to tool materials and geometries

被引：46
作者：
An, SO
Lee, FS
Noh, SL
机构：
[1] DAEYEU TECH JR COLL,DEPT DIE & MOLD DESIGN,SUNGNAM 461714,KYONGKI DO,SOUTH KOREA
[2] INHA UNIV,DEPT MECH ENGN,INCHON 402751,SOUTH KOREA
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 1997年 / 68卷 / 01期
关键词：
glass fiber reinforced plastics; single crystal diamond tool; poly crystal diamond; cubic boron nitride; tool dynamometer; scanning electron microscope; power spectrum density;
D O I：
10.1016/S0924-0136(96)02534-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the use of glass fiber reinforced plastics (GFRP) it is often necessary to cut the components, but the cutting of GFRP is often made difficult by the delamination of the composites and short tool life. In this work, the machinability of GFRP by means of tool materials and geometries was investigated experimentally. By proper selection of cutting tool material and geometry, excellent machining of the workpiece can be achieved. The surface quality relates closely to the feed rate and the cutting tools. (C) 1997 Elsevier Science S.A.
引用
收藏
页码：60 / 67
页数：8
相关论文
共 6 条
[1]  
KANEEDA T, 1989, NAMRC 15, V3, P216
[2]  
Lubin G., 1982, HDB COMPOSITES, P625
[3]   THE RELATION BETWEEN FIBER ORIENTATION AND TOOL WEAR - TOOL WEAR IN CUTTING GLASS-FIBER-REINFORCED PLASTICS [J].
SAKUMA, K ;
SETO, M .
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1983, 26 (218) :1420-1427
[4]   HIGH-SPEED STEEL TOOL WEAR STUDIES IN MACHINING OF GLASS-FIBER-REINFORCED PLASTICS [J].
SANTHANAKRISHNAN, G ;
KRISHNAMURTHY, R ;
MALHOTRA, SK .
WEAR, 1989, 132 (02) :327-336
[5]  
Takeyama H, 1998, ANN CIRP, V37, P93
[6]  
WANG X, 1990, P 1 INT C NEW MAN TE, P33
1