Modified ABS resin as a material for elastic rotor guardrails

被引：0
作者：
Lu, Wei [1 ,2 ]
Wang, Jia-Wei [2 ]
Zhang, Biao-Zhi [3 ]
Bai, Hong-Ying [2 ]
机构：
[1] Shandong Univ, Geotech & Struct Engn Res Ctr, Jinan, Peoples R China
[2] Minist Transport, Res Inst Highway, Beijing, Peoples R China
[3] China Univ Geosci, Fac Engn, Wuhan, Peoples R China
来源：
ADVANCED MATERIALS AND ENERGY SUSTAINABILITY | 2017年
关键词：
Guardrail material; ABS; modification; toughening; PARTICLE-SIZE; RUBBERY PHASE; DEFORMATION; CAVITATION; MECHANISMS; POLYMERS; BEHAVIOR; BLENDS; VOLUME;
D O I：
暂无
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
To tackle the problem of inadequate rotor toughness in the event of a crash, scrapped rubber powder (NBR) was proposed for the modification and strengthening of Acrylonitrile butadiene styrene (ABS) resin. The results demonstrated that NBR colloidal particles increased the impact strength of ABS resin. In addition, CPE could be employed to improve the compatibilization of the composite system. The best proportion of the composite material was determined to be ABS: NBR: CPE=100:20:15, which satisfies the requirements of an integrally-formed elastic rotor material for elastic rotor guardrails.
引用
收藏
页码：286 / 296
页数：11
相关论文
共 50 条
  • [1] The load separation criterion in elastic-plastic fracture mechanics: rate and temperature dependence of the material plastic deformation function in an ABS resin
    Agnelli, Silvia
    Baldi, Francesco
    Ricco, Theonis
    6TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES, 2012, 1459 : 114 - 116
  • [2] Are linear elastic material properties relevant predictors of the cyclic fatigue resistance of dental resin composites?
    Belli, Renan
    Petschelt, Anselm
    Lohbauer, Ulrich
    DENTAL MATERIALS, 2014, 30 (04) : 381 - 391
  • [3] Rate-Dependent Constitutive Model Development of PC/ABS Material
    Chaparala, Satish
    Jacobs, Josh
    CHALLENGES IN MECHANICS OF TIME DEPENDENT MATERIALS, VOL 2, 2017, : 163 - 172
  • [4] Toughness of SMI-modified ABS alloys and the associated deformation behavior
    Jar, PYB
    Wu, RY
    Kuboki, T
    Takahashi, K
    Shinmura, T
    JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 71 (10) : 1543 - 1553
  • [5] A type of ABS resin with special purpose
    Zhang, CY
    Liu, LH
    Wang, S
    Proceedings of the World Engineers' Convention 2004, Vol F-A, Resources and Energy, 2004, : 473 - 474
  • [6] Preparation, microstructure and properties of ABS resin with bimodal distribution of rubber particles
    Li, Gongsheng
    Lu, Shulai
    Pang, Jianxun
    Bai, Yanjun
    Zhang, Liu
    Guo, Xuhong
    MATERIALS LETTERS, 2012, 66 (01) : 219 - 221
  • [7] Modification Gave ABS Resin New Prospects
    Zhang Li
    China Chemical Reporter, 2010, 21 (21) : 28 - 29
  • [8] A Modified Version of ABS Algorithms
    Zhang Liwei and Xia Zunquan(Dept.of Appl.Math.
    数学研究与评论, 1993, (01) : 26 - 26
  • [9] Study on the coating material of hexamethylol melamine modified phenolic resin for casting filter
    Tang, Yaoji
    Huang, Renhe
    Yuan, Zhenfei
    JOURNAL OF APPLIED POLYMER SCIENCE, 2022, 139 (44)
  • [10] Properties of methyltetrahydrophthalic anhydride-cured epoxy resin modified with MITU
    He, S. J.
    Shi, K. Y.
    Guo, X. Z.
    Du, Z. J.
    Zhang, B. L.
    POLYMERS FOR ADVANCED TECHNOLOGIES, 2009, 20 (02) : 130 - 134
12345