Neutronic analyses and tools development efforts in the European DEMO programme

被引:24
作者
Fischer, U. [1 ]
Bachmann, C. [2 ]
Bienkowska, B. [3 ]
Catalan, J. P. [4 ]
Drozdowicz, K. [3 ]
Dworak, D. [3 ]
Leichtle, D. [1 ,5 ]
Lengar, I. [6 ]
Jaboulay, J. -C. [7 ]
Lu, L. [1 ]
Moro, F. [8 ]
Mota, F. [9 ]
Sanz, J. [4 ]
Szieberth, M. [10 ]
Palermo, I. [9 ]
Pampin, R. [5 ]
Porton, M. [11 ]
Pereslavtsev, P. [1 ]
Ogando, F. [4 ]
Rovni, I. [10 ]
Tracz, G. [3 ]
Villari, R. [8 ]
Zheng, S. [11 ]
机构
[1] Karlsruhe Inst Technol, Assoc KIT Euratom, D-76021 Karlsruhe, Germany
[2] EFDA, Garching, Germany
[3] Assoc IPPLM Euratom, IPPLM Warsaw INP Krakow, Katowice, Poland
[4] Univ Nacl Educ Distancia, E-28040 Madrid, Spain
[5] Fus Energy F4E, Barcelona, Spain
[6] MESCS JSI, Ljubljana, Slovenia
[7] CEA, DEN, DM2S, SERMA, F-91191 Gif Sur Yvette, France
[8] Assoc ENEA Euratom, ENEA Fus Div, Frascati, Italy
[9] Ctr Invest Energet Medioambientales & Tecnol CIEM, Madrid, Spain
[10] Budapest Univ Technol & Econ BME, Budapest, Hungary
[11] Euratom CCFE Fus Assoc, Culham Sci Ctr Fus Energy CCFE, Culham, England
基金
英国工程与自然科学研究理事会;
关键词
Demo; Neutronics; Monte Carlo;
D O I
10.1016/j.fusengdes.2014.02.013
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
The European Fusion Development Agreement (EFDA) recently launched a programme on Power Plant Physics and Technology (PPPT) with the aim to develop a conceptual design of a fusion demonstration reactor (DEMO) addressing key technology and physics issues. A dedicated part of the PPPT programme is devoted to the neutronics which, among others, has to define and verify requirements and boundary conditions for the DEMO systems. The quality of the provided data depends on the capabilities and the reliability of the computational tools. Accordingly, the PPPT activities in the area of neutronics include both DEMO nuclear analyses and development efforts on neutronic tools including their verification and validation. This paper reports on first neutronics studies performed for DEMO, and on the evaluation and further development of neutronic tools. (C) 2014 Karlsruhe Institute of Technology. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:1880 / 1884
页数:5
相关论文
共 16 条
[1]  
[Anonymous], 2003, MCNP - A General Monte Carlo N-Particle Transport Code
[2]  
Bruin E., 2013, CEAR6316
[3]   Benchmarking the MCR2S system for high-resolution activation dose analysis in ITER [J].
Davis, A. ;
Pampin, R. .
FUSION ENGINEERING AND DESIGN, 2010, 85 (01) :87-92
[4]  
Duchateau J.-L., 2011, CEA 1 COMMENTS NUCL
[5]  
Fausser C., 2010, SERMA104993 CEA
[6]  
Ferrari A., 2005, CERN200510, DOI [DOI 10.2172/877507, 10.5170/CERN-2005-010, DOI 10.5170/CERN-2005-010]
[7]   Neutronics design analyses of fusion power reactors based on a novel integral approach [J].
Fischer, U. ;
Grosse, D. ;
Pereslavtsev, R. ;
Stickel, S. ;
Tsige-Tamirat, H. ;
Weber, V. .
FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) :323-328
[8]   Status of the McCad geometry conversion tool and related visualization capabilities for 3D fusion neutronics calculations [J].
Grosse, D. ;
Fischer, U. ;
Kondo, K. ;
Leichtle, D. ;
Pereslavtsev, P. ;
Serikov, A. .
FUSION ENGINEERING AND DESIGN, 2013, 88 (9-10) :2210-2214
[9]  
Kemp R., 2012, WP11SYS01ACT5 EFDA
[10]  
Lopez D., 2010, TECF3IRGRAL001 UNED