Optimization of Squeeze Casting Parameters for 2017 A Wrought Al Alloy Using Taguchi Method

被引：30

作者：

Souissi, Najib ^{[1
]}

Souissi, Slim ^{[1
]}

Le Niniven, Christophe ^{[2
]}

Ben Amar, Mohamed ^{[1
]}

Bradai, Chedly ^{[1
]}

Elhalouani, Foued ^{[1
]}

机构：

[1] Univ Sfax, Natl Engn Sch Sfax, Sokra 3000, Tunisia

[2] Univ Limoges, SPCTS, UMR CNRS 7315, F-87068 Limoges, France

来源：

METALS | 2014年 / 4卷 / 02期

关键词：

2017A Al alloy; squeeze casting parameters; Taguchi method; optimization; mechanical properties; MAGNESIUM ALLOY; MECHANICAL-PROPERTIES; MATRIX COMPOSITE; LM13; ALLOY; MICROSTRUCTURE; DESIGN;

D O I：

10.3390/met4020141

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study applies the Taguchi method to investigate the relationship between the ultimate tensile strength, hardness and process variables in a squeeze casting 2017 A wrought aluminium alloy. The effects of various casting parameters including squeeze pressure, melt temperature and die temperature were studied. Therefore, the objectives of the Taguchi method for the squeeze casting process are to establish the optimal combination of process parameters and to reduce the variation in quality between only a few experiments. The experimental results show that the squeeze pressure significantly affects the microstructure and the mechanical properties of 2017 A Al alloy.

引用

页码：141 / 154

页数：14

共 31 条

[1] Investigating cooling curve profile and microstructure of a squeeze cast Al-4%Cu alloy [J].

Amin, K. M. ;

Mufti, Nadeem A. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (08) :1631-1639

[2]

[Anonymous], 1998, US DEP STAT PUB, P3

[3] Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method [J].

Asilturk, Ilhan ;

Akkus, Harun .

MEASUREMENT, 2011, 44 (09) :1697-1704

[4]

Brito C. C. D., 2010, MATER SCI FORUM, V643, P119

[5] LIGHTWEIGHT MATERIALS FOR AUTOMOTIVE APPLICATIONS [J].

COLE, GS ;

SHERMAN, AM .

MATERIALS CHARACTERIZATION, 1995, 35 (01) :3-9

[6] Effects of rheo-squeeze casting parameters on microstructure and mechanical properties of AlCuMnTi alloy [J].

Dai, Wei ;

Wu, Shusen ;

Lu, Shulin ;

Lin, Chong .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 538 :320-326

[7] Squeeze casting: an overview [J].

Ghomashchi, MR ;

Vikhrov, A .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 101 (1-3) :1-9

[8] Effect of squeeze casting parameters on the mechanical properties of AZ91-Ca Mg alloys [J].

Goh, C. S. ;

Soh, K. S. ;

Oon, P. H. ;

Chua, B. W. .

MATERIALS & DESIGN, 2010, 31 :S50-S53

[9] Preparation of semi-solid slurry containing fine and globular particles for wrought aluminum alloy 2024 [J].

Guo Hong-min ;

Yang Xiang-jie .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 (04) :799-804

[10] The microstructure of direct squeeze cast and gravity die cast 7050 (Al-6.2Zn-2.3Cu-2.3Mg) wrought Al alloy [J].

Kim, SW ;

Durrant, G ;

Lee, JH ;

Cantor, B .

JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, 1998, 6 (02) :75-87

← 1 2 3 4 →