Comparison of solar thermal and solar electric space heating and cooling systems for buildings in different climatic regions

被引:50
作者
Ayadi, Osama [1 ]
Al-Dahidi, Sameer [2 ]
机构
[1] Univ Jordan, Mech Engn Dept, Amman 11942, Jordan
[2] German Jordanian Univ, Sch Appl Tech Sci, Dept Mech & Maintenance Engn, Amman 11180, Jordan
关键词
Solar electrical cooling; Solar thermal cooling; Solar cooling simulation; Primary energy ratio; Solar heating; ZERO-ENERGY BUILDINGS; TECHNOECONOMIC ASSESSMENT; OFFICE BUILDINGS; POWER-SYSTEM; PV; CCHP; CONSUMPTION; OPERATION;
D O I
10.1016/j.solener.2019.06.033
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Solar thermal and Photovoltaic (PV) systems can save significant amount of non-renewable energy that are utilized to satisfy the energy services for buildings. The falling prices of PV in recent years increased the attractiveness of PV systems. The purpose of this research is to develop a systematic methodology for fair technical and economical comparison of reference and solar assisted systems. For this reason, the annual energy requirements for heating, cooling and DHW for a selected dormitory building under five representative climatic conditions were evaluated using the Hourly Analysis Program (HAP). At the same time, solar thermal and PV systems have been designed and simulated for the same building using Sketchup, Trnsys and PVsyst. Finally, a systematic comparison between the solar systems and five conventional systems have been carried out in terms of primary energy ratio, and Levelized Cost Of Energy (LCOE). For the case of Amman, solar thermal and electric systems achieved a non-renewable primary energy savings of 29% and 100%, respectively, whereas, they achieved LCOE savings of 15% and 62%, respectively compared to the best conventional system. The selection of the best solution for a given project requires a full understanding of the system performance and the interaction of its components rather than the technology efficiency only. This system performance depends on the building envelope, load patterns, availability of solar radiation, roof area availability, energy prices, and policies. Thus, a case-by-case analysis should be done for each project in each climatic region.
引用
收藏
页码:545 / 560
页数:16
相关论文
共 76 条
[1]   Novel performance curves to determine optimal operation of CCHP systems [J].
Afzali, Sayyed Faridoddin ;
Mahalec, Vladimir .
APPLIED ENERGY, 2018, 226 :1009-1036
[2]   The capability to reduce primary energy demand in EU housing [J].
Anisimova, Nataliya .
ENERGY AND BUILDINGS, 2011, 43 (10) :2747-2751
[3]  
[Anonymous], 2011, BUILD EN DAT BOOK
[4]  
[Anonymous], 2018, FUT COOL, DOI [10.1787/9789264301993-en, DOI 10.1787/9789264301993-EN]
[5]  
Ayadi O., 2008, INT C HEAT COOL BUIL
[6]  
Ayadi O., 2009, 29 ISES BIENN SOL WO
[7]   Techno-economic assessment of a grid connected photovoltaic system for the University of Jordan [J].
Ayadi, Osama ;
Al-Assad, Rami ;
Al Asfar, Jamil .
SUSTAINABLE CITIES AND SOCIETY, 2018, 39 :93-98
[8]   Solar cooling systems utilizing concentrating solar collectors - An overview [J].
Ayadi, Osama ;
Aprile, Marcello ;
Motta, Mario .
1ST INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY (SHC 2012), 2012, 30 :875-883
[9]   Performance assessment for solar heating and cooling system for office building in Italy [J].
Ayadi, Osama ;
Mauro, Alberto ;
Aprile, Marcello ;
Motta, Mario .
1ST INTERNATIONAL CONFERENCE ON SOLAR HEATING AND COOLING FOR BUILDINGS AND INDUSTRY (SHC 2012), 2012, 30 :490-494
[10]   Solar absorption cooling plant in Seville [J].
Bermejo, Pablo ;
Javier Pino, Francisco ;
Rosa, Felipe .
SOLAR ENERGY, 2010, 84 (08) :1503-1512