Kinetic model for torrefaction of wood chips in a pilot-scale continuous reactor

Torrefaction is a mild thermal treatment (200-300 degrees C) in an inert atmosphere, known to increase the energy density of biomass by evaporation of water and a proportion of the volatiles. In this work a "two-step reaction in series" model was used to describe the thermal degradation kinetics of pine wood. The kinetic parameters were determined using a thermogravimetric analyzer (TGA) and the mass loss during the initial heating period was taken into account when deriving the kinetic parameters. It was shown that the experimental results at different heating rates (10-50 degrees C min(-1)) are in good accordance with the model data. In an additional step a continuous, pilot scale reactor was built to produce torrefied wood chips in large quantities. The "two-step reaction in series" model was applied to predict the mass yield of the torrefaction reaction. Parameters used for the calculation were the temperature along the reactor and the biomass feeding rate in combination with the kinetic parameters obtained from the tests in the TGA. Together with results from a laboratory scale, batch torrefaction reactor that was used to determine the higher heating value (HHV) and mass loss (y) of the same material at different torrefaction temperatures, it was possible to predict the HHV of torrefied wood chips from the pilot reactor. The results from this study and the presented modeling approach can be used to predict the product quality from pilot scale torrefaction reactors based on small scale experiments and could be used to improve the homogeneity of torrefied products, which still is a problem for most operational torrefaction pilot plants today. (C) 2014 Elsevier B.V. All rights reserved.