Micro-electro discharge machining drilling of stainless steel with copper electrode: The influence of process parameters and electrode size

被引：18

作者：

D'Urso, Gianluca ^{[1
]}

Maccarini, Giancarlo ^{[1
]}

Quarto, Mariangela ^{[1
]}

Ravasio, Chiara ^{[1
]}

Caldara, Michele ^{[2
]}

机构：

[1] Univ Bergamo, Dept Engn, Viale Marconi 5, I-24044 Bergamo, Italy

[2] Univ Bergamo, DISA, Bergamo, Italy

来源：

ADVANCES IN MECHANICAL ENGINEERING | 2016年 / 8卷 / 12期

关键词：

Micro-electro discharge machining; micro-drilling; process parameters; copper electrode; stainless steel; power measurement; EDM PROCESS PARAMETERS; MATERIAL REMOVAL RATE; TUNGSTEN CARBIDE; PREDICTION; SIMULATION;

D O I：

10.1177/1687814016676425

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This article is about the implementation of an acquisition system for the measurement of micro-electro discharge machining process parameters and the statistical analysis of their influence on the process performance. The microelectro discharge machining drilling of 316L stainless steel with copper tubular electrodes was studied and the exchanged power was taken into account as a comprehensive variable able to represent the effect of the peak current and voltage on the final result. The direct proportionality between the exchanged power and the nominal process parameters was verified. A linear and non-linear regression approach was used in order to obtain predictive equations for the most important aspects of micro-electro discharge machining process, such as the machining time and the electrode wear.

引用

页码：1 / 16

页数：16

共 23 条

[1] Process simulation of micro electro-discharge machining on molybdenum [J].

Allen, Philip ;

Chen, Xiaolin .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 186 (1-3) :346-355

[2]

Gostimirovic M, 2011, INDIAN J ENG MATER S, V18, P411

[3]

Hall M., 2009, SIGKDD EXPLORATIONS, V11, P10, DOI [DOI 10.1145/1656274.1656278, 10.1145/1656274.1656278]

[4] Micro-hole machining of copper using the electro-discharge machining process with a tungsten carbide electrode compared with a copper electrode [J].

Her, MG ;

Weng, FT .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2001, 17 (10) :715-719

[5]

Hesselbach J., 2004, PRODUCTION ENG, V11, P29

[6] A review on the conventional and micro-electrodischarge machining of tungsten carbide [J].

Jahan, M. P. ;

Rahman, M. ;

Wong, Y. S. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2011, 51 (12) :837-858

[7] A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials [J].

Jahan, M. P. ;

Wong, Y. S. ;

Rahman, M. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) :3956-3967

[8] Geometry prediction of EDM-drilled holes and tool electrode shapes of micro-EDM process using simulation [J].

Jeong, Young Hun ;

Min, Byung-Kwon .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (12-13) :1817-1826

[9] Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes [J].

Khan, A. A. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 39 (5-6) :482-487

[10] Influence of EDM process parameters in deep hole drilling of Inconel 718 [J].

Kuppan, P. ;

Rajadurai, A. ;

Narayanan, S. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 38 (1-2) :74-84

← 1 2 3 →