Microstructure of a boron containing high purity nickel-based alloy 640

被引：31

作者：

Thuvander, M

Stiller, K ^{[1
]}

机构：

[1] Chalmers Univ Technol, Dept Expt Phys, SE-41296 Gothenburg, Sweden

[2] Univ Gothenburg, SE-41296 Gothenburg, Sweden

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2000年 / 281卷 / 1-2期

关键词：

nickel alloy; precipitation; grain boundary; secondary ion mass spectroscopy; atom probe analysis; transmission electron microscopy; carbide; boride;

D O I：

10.1016/S0921-5093(99)00741-8

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A high purity model alloy with major composition Ni-30Cr-10Fe-0.024C-0.006B (wt.%), corresponding to the commercial Alloy 690. was investigated using secondary ion mass spectroscopy, atom probe analysis and transmission electron microscopy in combination with energy dispersive X-ray analysis and electron energy loss spectroscopy. Solution annealing at 1200 degrees C for 20 min put most carbon and boron into solution, but some intergranular borides and carbides, probably formed during quenching, were observed. Heat treatment at 700 degrees C for 1 and 100 h resulted in substantial intergranular precipitation of Cr23C6 and Cr2B. The influence of boron on the precipitation process in Alloy 690 is discussed and compared with precipitation in Alloy 600. (C) 2000 Elsevier Science S.A. Ail rights reserved.

引用

页码：96 / 103

页数：8

共 50 条

[21] Influence of High-Current-Density Impulses on the Compression Behavior: Experiments with Iron and a Nickel-Based Alloy
E. Demler
G. Gerstein
A. Dalinger
A. Epishin
D. Rodman
F. Nürnberger
Journal of Materials Engineering and Performance, 2017, 26 : 177 - 184
[22] Influence of High-Current-Density Impulses on the Compression Behavior: Experiments with Iron and a Nickel-Based Alloy
Demler, E.
Gerstein, G.
Dalinger, A.
Epishin, A.
Rodman, D.
Nuernberger, F.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (01) : 177 - 184
[23] The influence of heat treatments on the corrosion behaviour of nickel-based alloy 718
Valle, L. C. M.
Santana, A. I. C.
Rezende, M. C.
Dille, J.
Mattos, O. R.
de Almeida, L. H.
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 809
[24] Oxidation behaviour of a developmental nickel-based alloy and the role of minor elements
Taylor, Mary
Ding, Rengen
Mignanelli, Paul
Hardy, Mark
CORROSION SCIENCE, 2022, 196
[25] Structure and phases in nickel-base self-fluxing alloy coating containing high chromium and boron
F. Otsubo
H. Era
K. Kishitake
Journal of Thermal Spray Technology, 2000, 9 : 107 - 113
[26] Study on the High Temperature Tensile Properties and Strengthening Mechanism of Nitrogen Containing Nickel-Based Deposited Metals
Dai, Zhiyong
Su, Yunhai
Wang, Yingdi
Yang, Taisen
Liang, Xuewei
ADVANCED ENGINEERING MATERIALS, 2024, 26 (08)
[27] The Effect of the Cooling Rates on the Microstructure and High-Temperature Mechanical Properties of a Nickel-Based Single Crystal Superalloy
Wang, Xiao-Yan
Li, Meng
Wen, Zhi-Xun
MATERIALS, 2020, 13 (19)
[28] Microstructure and mechanical properties of high boron iron-based alloy solidified in different moulds
Liu Zhongli
Li Yanxiang
Chen Xiang
Hu Kaihua
ACTA METALLURGICA SINICA, 2007, 43 (05) : 477 - 481
[29] Effects of B content on microstructure and high-temperature stress rupture properties of a high chromium polycrystalline nickel-based superalloy
Wang, Haiwei
Yang, Jinxia
Meng, Jie
Ci, Shiwei
Yang, Yanhong
Sheng, Naicheng
Zhou, Yizhou
Sun, Xiaofeng
JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 860
[30] The microstructure of heat-treated nickel-based superalloy 718Plus
Whitmore, Lawrence
Ahmadi, Mohammad Reza
Guetaz, Laure
Leitner, Harald
Povoden-Karadeniz, Erwin
Stockinger, Martin
Kozeschnik, Ernst
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 610 : 39 - 45

← 1 2 3 4 5 →