Microstructures and mechanical properties of Mg-6Li-6.5Gd-1Dy-2Zn alloys

被引:0
作者
Niu, Zhongyi [1 ]
Leng, Zhe [1 ]
Zhang, Jinghuai [1 ]
Wu, Ruizhi [1 ]
Zhang, Milin [1 ]
机构
[1] Harbin Engn Univ, Key Lab Superlight Mat & Surface Technol, Minist Educ, Harbin 150001, Peoples R China
来源
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES XV | 2014年 / 773-774卷
关键词
Microstructures; Mechanical properties; Mg-Li based alloys; SUPERPLASTICITY;
D O I
10.4028/www.scientific.net/MSF.773-774.275
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Extrusion Mg-6Li-6.5Gd-1Dy-2Zn alloy was prepared successfully by vacuum melting. The microstructures and mechanical properties of as-cast and as-extruded Mg-6Li-6.5Gd-1Dy-2Zn alloys were investigated. Extruding process refines the alpha(Mg) phase and beta(Li) phase, and makes the Mg3X phase crushed and dispersed well. After heat treatment, Mg3X phase particles became finer and much more RE enriched phase particles formed in the matrix. These effects result in the improvement of mechanical properties of the alloys. In this study, after solution treated at 510 degrees C for 3h and aged at 215 degrees C for 99h, the as-extruded alloy exhibits the best mechanical properties, and the microhardness, ultimate tensile and elongation reach 103.0, 249 MPa and 34.8%, respectively.
引用
收藏
页码:275 / 280
页数:6
相关论文
共 18 条
[1]   Effect of Y on microstructure and mechanical properties of duplex Mg-7Li alloys [J].
Dong, Hanwu ;
Wang, Lidong ;
Wu, Yaoming ;
Wang, Limin .
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 506 (01) :468-474
[2]   Deformation behaviour of Mg-Li-Al alloys [J].
Drozd, Z ;
Trojanová, Z ;
Kúdela, S .
JOURNAL OF ALLOYS AND COMPOUNDS, 2004, 378 (1-2) :192-195
[3]   Improving the superplastic properties of a two-phase Mg-8% Li alloy through processing by ECAP [J].
Furui, M ;
Xu, C ;
Aida, T ;
Inoue, M ;
Anada, H ;
Langdon, TG .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 410 :439-442
[4]  
Hauser F.E., 1958, Transactions of the ASM, V50, P856
[5]  
Inoue M., 1992, Journal of Japan Institute of Light Metals, V42, P67, DOI 10.2464/jilm.42.67
[6]   Flow and cavitation in a quasi-superplastic two-phase magnesium-lithium alloy [J].
Kawasaki, Megurni ;
Kubota, Kohei ;
Higashi, Kenj I. ;
Langdon, Terence G. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 429 (1-2) :334-340
[7]   Effects of Cu addition on the microstructure and hardness of Mg-5Li-3Al-2Zn alloy [J].
Li, Jiqing ;
Qu, Zhikun ;
Wu, Ruizhi ;
Zhang, Milin .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (10-11) :2780-2783
[8]   Effects of Nd on microstructure and mechanical properties of as-cast Mg-8Li-3Al alloy [J].
Li Ming ;
Hao Hai ;
Zhang Aimin ;
Song Yingde ;
Zhang Xingguo .
JOURNAL OF RARE EARTHS, 2012, 30 (05) :492-496
[9]   Effects of Nd on microstructure and mechanical properties of as-cast LA141 alloys [J].
Liu, Bin ;
Zhang, Milin ;
Wu, Ruizhi .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 487 (1-2) :347-351
[10]   Low temperature superplasticity in an AZ91 magnesium alloy processed by ECAE [J].
Mabuchi, M ;
Iwasaki, H ;
Yanase, K ;
Higashi, K .
SCRIPTA MATERIALIA, 1997, 36 (06) :681-686