Determination of plastic constitutive properties of microparticles through single particle compression

被引：35

作者：

Assadi, H. ^{[1
]}

Irkhin, I. ^{[1
]}

Gutzmann, H. ^{[1
]}

Gaertner, F. ^{[1
]}

Schulze, M. ^{[1
]}

Vidaller, M. Villa ^{[1
]}

Klassen, T. ^{[1
]}

机构：

[1] Helmut Schmidt Univ, Inst Mat Technol, Hamburg, Germany

来源：

ADVANCED POWDER TECHNOLOGY | 2015年 / 26卷 / 06期

关键词：

Copper; Microparticles; Compression; Plastic properties; Cold spray; COLD; DEFORMATION; SUBSTRATE; MODELS;

D O I：

10.1016/j.apt.2015.08.013

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

There is a need for information on plastic properties of microparticles for application in powder technology. This includes powder compaction processes, in which densification involves particle deformation. The present paper reports on the evaluation of yield strength, ultimate tensile strength and the entire stress-strain relationship of single metallic particles, by combining mathematical modelling and compression tests using a modified nanoindenter. Development and application of the method is initially demonstrated for the case of copper particles of 13-87 mu m in diameter. The examined copper particles exhibited similar plastic properties to one another, but different to bulk copper. The method is further employed to work out plastic properties of a CoNiCrAlY powder, for which no bulk data exists. The findings are discussed in view of implications for cold spraying, where the deposition and coating characteristics are strongly influenced by plastic constitutive properties of particles. (C) 2015 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.

引用

页码：1544 / 1554

页数：11

共 29 条

[1]

[Anonymous], AB AN US MAN

[2] Energy absorption during compression and impact of dry elastic-plastic spherical granules [J].

Antonyuk, Sergiy ;

Heinrich, Stefan ;

Tomas, Juergen ;

Deen, Niels G. ;

van Buijtenen, Maureen S. ;

Kuipers, J. A. M. .

GRANULAR MATTER, 2010, 12 (01) :15-47

[3] On Parameter Selection in Cold Spraying [J].

Assadi, H. ;

Schmidt, T. ;

Richter, H. ;

Kliemann, J. -O. ;

Binder, K. ;

Gaertner, F. ;

Klassen, T. ;

Kreye, H. .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2011, 20 (06) :1161-1176

[4] Bonding mechanism in cold gas spraying [J].

Assadi, H ;

Gärtner, F ;

Stoltenhoff, T ;

Kreye, H .

ACTA MATERIALIA, 2003, 51 (15) :4379-4394

[5]

Champagne VK, 2007, WOODHEAD PUBL MATER, P1, DOI 10.1533/9781845693787

[6] A plasticity model for powder compaction processes incorporating particle deformation and rearrangement [J].

Chandler, H. W. ;

Sands, C. M. ;

Song, J. H. ;

Withers, P. J. ;

McDonald, S. A. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2008, 45 (7-8) :2056-2076

[7]

De Garmo E.P., 2011, DeGarmo's materials and processes in manufacturing

[8] Gas dynamic principles of cold spray [J].

Dykhuizen, RC ;

Smith, MF .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1998, 7 (02) :205-212

[9] Effect of Substrate Temperature on Cold-Gas-Sprayed Coatings on Ceramic Substrates [J].

Ernst, K. -R. ;

Braeutigam, J. ;

Gaertner, F. ;

Klassen, T. .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2013, 22 (2-3) :422-432

[10]

Fischer-Cripps A.C., 2011, Nanoindentation, V1

← 1 2 3 →