A cobalt-rich eutectic high-entropy alloy in the system Al-Co-Cr-Fe-Ni

被引:31
作者
Shafiei, Ali [1 ]
Rajabi, Samin [1 ]
机构
[1] NRI, Met Grp, Tehran 14665517, Iran
来源
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING | 2019年 / 125卷 / 11期
关键词
SIGMA-PHASE FORMATION; MECHANICAL-PROPERTIES; MICROSTRUCTURE; THERMODYNAMICS; SUPERALLOYS; EXPLORATION; COMPOSITES; CRITERION; STRATEGY; PATH;
D O I
10.1007/s00339-019-3084-9
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
By using the well-established CALPHAD methodology, a cobalt-rich eutectic high-entropy alloy is designed and made for the system Al-Co-Cr-Fe-Ni. Microstructural studies show that the designed alloy has a dual FCC/BCC phase structure and is composed of nanostructured lamellar-irregular regions. The mechanical properties of the alloy are investigated by compression test. The ultimate strength and the ductility of the alloy are measured to be 2150 MPa and 40%, respectively. The effect of Al concentration on the microstructure and mechanical properties of the alloy is investigated.
引用
收藏
页数:11
相关论文
共 48 条
[1]  
[Anonymous], 2000, NICKEL COBALT THEIR, DOI DOI 10.1361/NCTA2000P003
[2]  
[Anonymous], JMATPRO MAT PROP SIM
[3]  
Baker H., 1992, ASM HDB ALLOY PHASE
[4]   A review of directionally solidified intermetallic composites for high-temperature structural applications [J].
Bei, H ;
Pharr, GM ;
George, EP .
JOURNAL OF MATERIALS SCIENCE, 2004, 39 (12) :3975-3984
[5]   Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing [J].
Bhattacharjee, T. ;
Wani, I. S. ;
Sheikh, S. ;
Clark, I. T. ;
Okawa, T. ;
Guo, S. ;
Bhattacharjee, P. P. ;
Tsuji, N. .
SCIENTIFIC REPORTS, 2018, 8
[6]   Microstructural development in equiatomic multicomponent alloys [J].
Cantor, B ;
Chang, ITH ;
Knight, P ;
Vincent, AJB .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :213-218
[7]   An analysis of measurement of solute segregation in Ni-base superalloys using X-ray spectroscopy [J].
D'Souza, N. ;
Lekstrom, M. ;
Dong, H. B. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 490 (1-2) :258-265
[8]   Solidification path in third-generation Ni-based superalloys, with an emphasis on last stage solidification [J].
D'Souza, N. ;
Dong, H. B. .
SCRIPTA MATERIALIA, 2007, 56 (01) :41-44
[9]   Thermodynamic re-assessment of the ternary system Al-Cr-Ni. [J].
Dupin, N ;
Ansara, I ;
Sundman, B .
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 2001, 25 (02) :279-298
[10]   Thermodynamics of concentrated solid solution alloys [J].
Gao, M. C. ;
Zhang, C. ;
Gao, P. ;
Zhang, F. ;
Ouyang, L. Z. ;
Widom, M. ;
Hawk, J. A. .
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2017, 21 (05) :238-251