3D-Printed Frequency Selective Surfaces for Microwave Absorbers

被引：0
作者：
Kronberger, Rainer [1 ]
Soboll, Patrick [1 ]
机构：
[1] TH Koeln Univ Technol Arts & Sci, High Frequency Lab, Betzdorfer Str 2, D-50679 Cologne, Germany
来源：
2016 INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION (ISAP) | 2016年
关键词：
3D-Printing; printed absorber; FSS;
D O I：
暂无
中图分类号：
TN [电子技术、通信技术];
学科分类号：
0809 ;
摘要：
A flat periodic FSS (frequency selective surface) is presented, which is fully fabricated by a 3D-printer and commercial 3D printing filaments which normally are used for printing metal like structures. The FSS absorber structure was developed and optimized for 10 GHz, fabricated with the 3D printer, measured afterwards and compared with the simulations. Further simulations were made with the new materials at higher frequencies and the results confirm that 3D printing technology works well and could be used to the best advantage for absorbers and other applications in the frequency range below 100 GHz.
引用
收藏
页码：178 / 179
页数：2
相关论文
共 50 条
  • [1] Novel 3D-Printed Reconfigurable Origami Frequency Selective Surfaces With Flexible Inkjet-Printed Conductor Traces
    Cui, Yepu
    Nauroze, Syed Abdullah
    Tentzeris, Manos M.
    2019 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2019, : 1367 - 1370
  • [2] 3D-Printed Multiband Absorber Based on Stereo Frequency Selective Structures
    Deng, Guangsheng
    Sun, Hanxiao
    Lv, Kun
    Yang, Jun
    Yin, Zhiping
    Chi, Baihong
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2021, 218 (07):
  • [3] Selective Electroplating for 3D-Printed Electronics
    Lazarus, Nathan
    Bedair, Sarah S.
    Hawasli, Sami H.
    Kim, Myung Jun
    Wiley, Benjamin J.
    Smith, Gabriel L.
    ADVANCED MATERIALS TECHNOLOGIES, 2019, 4 (08)
  • [4] 3D-printed sound absorbers: compact and customisable at broadband frequencies
    F. Setaki
    F. Tian
    Michela Turrin
    M. Tenpierik
    L. Nijs
    A. van Timmeren
    Architecture, Structures and Construction, 2023, 3 (2): : 205 - 215
  • [5] Narrowband Frequency-Selective Surface on 3D-Printed Substrate for X-Band Applications
    Inbarani, J.
    Manikandan, E.
    JOURNAL OF ELECTRONIC MATERIALS, 2024, 53 (12) : 8223 - 8231
  • [6] 3D-Printed Flat Lens for Microwave Applications
    Zhang, Shiyu
    Vardaxoglou, Yiannis
    Whittow, Will
    Mittra, Raj
    2015 LOUGHBOROUGH ANTENNAS & PROPAGATION CONFERENCE (LAPC), 2015,
  • [7] Frictional Anisotropy of 3D-Printed Fault Surfaces
    Vincent-Dospital, Tom
    Steyer, Alain
    Renard, Francois
    Toussaint, Renaud
    FRONTIERS IN EARTH SCIENCE, 2021, 9
  • [8] A Highly Frequency-Selective 3D-Printed Dielectric Structure for the Terahertz Range
    Tobias Kubiczek
    Kevin Kolpatzeck
    Thorsten Schultze
    Jan C. Balzer
    Journal of Infrared, Millimeter, and Terahertz Waves, 2024, 45 : 322 - 336
  • [9] Tunable Frequency Selective Surface Based on a Sliding 3D-Printed Inserted Dielectric
    Qiu, Shihao
    Guo, Qingxin
    Li, Zengrui
    IEEE ACCESS, 2021, 9 : 19743 - 19748
  • [10] A Highly Frequency-Selective 3D-Printed Dielectric Structure for the Terahertz Range
    Kubiczek, Tobias
    Kolpatzeck, Kevin
    Schultze, Thorsten
    Balzer, Jan C.
    JOURNAL OF INFRARED MILLIMETER AND TERAHERTZ WAVES, 2024, 45 (3-4) : 322 - 336
12345