Production of Sm-Fe-N bulk magnets by spark plasma sintering method

被引：25
作者：
Saito, Tetsuji [1 ]
机构：
[1] Chiba Inst Technol, Dept Mech Sci & Engn, Narashino, Chiba 2750016, Japan
来源：
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2014年 / 369卷
关键词：
Rare-earth permanent magnets; Spark plasma sintering; Magnetic properties; POWDERS; COMPRESSION; COMPACTION;
D O I：
10.1016/j.jmmm.2014.06.034
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Th2Zn17-type and TbCu7-type Sm-Fe-N powder were consolidated into bulk magnets by the spark plasma sintering (SPS) method. It was found that the coarse TbCu7-type Sm-Fe-N powder possessed greater stability during sintering than the One Th2Zn17-type Sm-Fe-N powder. Although the TbCu7-type magnets produced at temperatures exceeding 773 K showed a low coercivity comparable to that of the Th2Zn17-type magnets, they exhibited a higher coercivity than the Th2Zn17-type magnets when produced at 773 K or lower. The TbCu7-type magnet produced at 773 K exhibited a high remanence of 96.4 Am-2/kg with a high coercivity of 0.72 MA/m. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：184 / 188
页数：5
相关论文
共 20 条
  • [11] New method for the production of bulk amorphous materials of Nd-Fe-B alloys
    Saito, T
    Takeishi, H
    Nakayama, N
    [J]. JOURNAL OF MATERIALS RESEARCH, 2005, 20 (03) : 563 - 566
  • [12] Structures and magnetic properties of Sm-Fe-N bulk magnets produced by the spark plasma sintering method
    Saito, Tetsuji
    [J]. JOURNAL OF MATERIALS RESEARCH, 2007, 22 (11) : 3130 - 3136
  • [13] Magnetic properties of isotropic Sm-Fe-N magnets produced by compression shearing method
    Saito, Tetsuji
    Kitazima, Hiroshi
    [J]. JOURNAL OF APPLIED PHYSICS, 2012, 111 (07)
  • [14] SUGIMOTO S, 2008, P 20 INT WORKSH RAR, P106
  • [15] Fabrication of High-performance Sm-Fe-N isotropic bulk magnets by a combination of High-pressure compaction and current sintering
    Takagi, Kenta
    Nakayama, Hiroyuki
    Ozaki, Kimihiro
    Kobayashi, Keizo
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2012, 324 (07) : 1337 - 1341
  • [16] Takeishi H., 2005, Journal of the Society of Materials Science, Japan, V54, P233, DOI 10.2472/jsms.54.233
  • [17] Formation of modified TbCu7 and Th2Zn17 type structures during annealing of mechanical-alloyed Sm-Fe powders
    Teresiak, A
    Kubis, M
    Mattern, N
    Wolf, M
    Muller, KH
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 1998, 274 (1-2) : 284 - 293
  • [18] Tokita M., 1993, J JAPAN SOC POWDER P, V30, P790, DOI [10.4164/sptj.30._, DOI 10.4164/SPTJ.30, 10.4164/sptj.30.11790, DOI 10.4164/SPTJ.30.11_790]
  • [19] WANG KY, 1994, PHYSICA B, V203, P54, DOI 10.1016/0921-4526(94)90276-3
  • [20] MAGNETIC-PROPERTIES OF RAPIDLY QUENCHED HIGH REMANENCE ZR ADDED SM-FE-N ISOTROPIC POWDERS
    YONEYAMA, T
    YAMAMOTO, T
    HIDAKA, T
    [J]. APPLIED PHYSICS LETTERS, 1995, 67 (21) : 3197 - 3199
12