Use of amorphous boron and amorphous nano boron powder mixture in fabrication of long in-situ MgB2/Fe wires

被引:21
作者
Akdogan, Mustafa
Yetis, Hakan
Gajda, Daniel
Karaboga, Firat
Rogacki, Krzysztof
Morawski, Andrzej
Belenli, Ibrahim
机构
[1] Abant Izzet Baysal University, Department of Physics, Bolu
[2] International Laboratory of High Magnetic Fields and Low Temperatures, Gajowicka 95, Wroclaw
[3] Institute of High Pressure Physics of the Polish Academy of Sciences ul, Sokolowska, 29/37, Warsaw
关键词
MgB2; Wires; Transport engineering J(c); Fe sheath; Amorphous nano boron; CRITICAL-CURRENT DENSITY; MAGNESIUM DIBORIDE; EX-SITU; ENHANCEMENT; TAPES; FIELD;
D O I
10.1016/j.jallcom.2017.01.142
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
We report a study on the structural and transport properties of long in situ MgB2/Fe wires that are prepared by use of amorphous boron and nano amorphous boron powders with 50-50% weight ratio. The wire samples are fabricated by means of a standard Powder-in-Tube (PIT) method. Transport measurements are applied under high magnetic fields, of up to 9 T, obtained in a Bitter magnet. We find that use of a mixture of the amorphous boron, and amorphous nano boron precursor powders at equal amounts is very promising way to fabricate long wires without any degradation in transport engineering Ice values in the presence of low and moderate magnetic fields.(C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:399 / 403
页数:5
相关论文
共 25 条
[1]   Effect of the initial filling density on the critical current of in-situ Fe/MgB2 wires [J].
Akdogan, Mustafa ;
Yetis, Hakan ;
Gajda, Daniel ;
Karaboga, Firat ;
Ulgen, Asaf Tolga ;
Demirturk, Emine ;
Belenli, Ibrahim .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 649 :1007-1010
[2]   Sol-gel insulation coatings on Monel/Fe/MgB2 wires for coil development [J].
Arda, L. ;
Boyraz, C. ;
Sacli, O. A. ;
Tomsic, M. ;
Hascicek, Y. S. .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2008, 18 (02) :1208-1211
[3]   Superior critical current density obtained in MgB2 bulks through low-cost carbon-encapsulated boron powder [J].
Barua, Shaon ;
Al Hossain, Md Shahriar ;
Ma, Zongqing ;
Patel, Dipak ;
Mustapic, Mislav ;
Somer, Mehmet ;
Acar, Selcuk ;
Kokal, Ilkin ;
Morawski, Andrzej ;
Cetner, T. ;
Gajda, Daniel ;
Dou, Shi Xue .
SCRIPTA MATERIALIA, 2015, 104 :37-40
[4]   Improved Performances of MgB2 Conductor by Using of Innovative Amorphous and Nano-Structurated Boron [J].
Bovone, Gianmarco ;
Vignolo, Maurizio ;
Romano, Gennaro ;
Palenzona, Andrea ;
Malagoli, Andrea ;
Siri, Antonio S. .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2013, 23 (03)
[5]   Transport critical current density in Fe-sheathed nano-SiC doped MgB2 wires [J].
Dou, SX ;
Horvat, J ;
Soltanian, S ;
Wang, XL ;
Qin, MJ ;
Zhou, SH ;
Liu, HK ;
Munroe, PG .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2003, 13 (02) :3199-3202
[6]   Fabrication of MgB2 tapes sheathed with carbon steels by ex situ and in situ methods [J].
Fujii, H ;
Togano, K ;
Kumakura, H .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2003, 13 (02) :3217-3220
[7]   Comparison of critical current density in SiC-doped in situ MgB2 coils and straight wire samples processed by HIP [J].
Gajda, D. ;
Morawski, A. ;
Zaleski, A. ;
Cetner, T. ;
Malecka, M. ;
Presz, A. ;
Rindfleisch, M. ;
Tomsic, M. ;
Thong, C. J. ;
Surdacki, P. .
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2013, 26 (11)
[8]   A MgB2 12.5 kVA superconductor transformer [J].
Hascicek, Y. S. ;
Akin, Y. ;
Baldwin, T. W. ;
Rindfleisch, M. M. ;
Yue, J. ;
Sumption, M. D. ;
Tomsic, M. .
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2009, 22 (06)
[9]   Effect of boron particle size on microstructure and superconducting properties of in-situ Cu addition MgB2 multifilamentary wire [J].
Hishinuma, Y. ;
Kikuchi, A. ;
Shimada, Y. ;
Hata, S. ;
Takeuchi, T. ;
Yamada, S. ;
Sagara, A. .
11TH EUROPEAN CONFERENCE ON APPLIED SUPERCONDUCTIVITY (EUCAS2013), PTS 1-4, 2014, 507
[10]   Advanced MgB2 wire made by internal magnesium diffusion process [J].
Husek, I. ;
Kovac, P. ;
Rosova, A. ;
Melisek, T. ;
Pachla, W. ;
Hain, M. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 588 :366-369